Dibujante Nuevo Boceto

From FreeCAD Documentation
Revision as of 14:08, 30 March 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎中文(中国大陆)‎

Sketcher NewSketch.svg {{{Name/es}}}

Ubicación en el Menú
Croquizador→ Crear croquis
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
Introducido en versión
Ver también
Sketcher MapSketch, Sketcher Reorient


This will create a new sketch.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.


Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.


The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D-Space using Placement.