Sketcher NewSketch: Difference between revisions
No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
====Note==== <!--T:4--> |
====Note==== <!--T:4--> |
||
The sketch can be re-mapped to antoher already existing face. |
|||
The sketch can be moved in the 3D-Space using [[Placement]]. |
|||
Revision as of 22:17, 24 November 2014
|
|
| Menu location |
|---|
| Sketch → Create sketch |
| Workbenches |
| Sketcher, PartDesign |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| None |
Description
This will create a new sketch.
Usage
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Note
The sketch can be re-mapped to antoher already existing face.
The sketch can be moved in the 3D-Space using Placement.