Sketcher NewSketch: Difference between revisions
No edit summary |
No edit summary |
||
Line 12: | Line 12: | ||
* YZ-Plane |
* YZ-Plane |
||
You can change an offset to any of the three planes and the side of the offset. |
You can change an offset to any of the three planes and the side of the offset. |
||
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face. |
|||
====Note==== <!--T:4--> |
====Note==== <!--T:4--> |
Revision as of 22:14, 24 November 2014
Sketcher NewSketch |
Menu location |
---|
Sketch → Create sketch |
Workbenches |
Sketcher, PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
This will create a new sketch.
Usage
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.