Sketcher Micro Tutorial - Esercitazione sui Vincoli

From FreeCAD Documentation
Revision as of 19:26, 13 August 2015 by Renatorivo (talk | contribs) (Created page with "== Una spiegazione sintetica == Con i vincoli di sketch di FreeCADC vale una regola generale: meno sono i vincoli dimensionali, meglio è. È sempre preferibile utilizzare un...")
Tutorial
Argomento
{{{Topic}}}
Livello di difficoltà
Principiante
Tempo di esecuzione
Meno di 15 minuti
Autori
Mark Stephen (Quick61)
Versione di FreeCAD
0.15.4671 o successiva
Files di esempio
Nessuno
Vedere anche
Nessuno

Benvenuto

Benvenuto. Questo tutorial è stato progettato per aiutare i nuovi utenti di FreeCAD a familiarizzare con le tecniche e i modi migliori per vincolare uno schizzo. Questo micro tutorial è fondamentalmente una copia migliorata di un post del forum di FreeCAD su questo argomento. Viene messo qui per consentirne l'accesso a un maggior numero di utenti in modo più agevole.

Una spiegazione sintetica

Con i vincoli di sketch di FreeCADC vale una regola generale: meno sono i vincoli dimensionali, meglio è. È sempre preferibile utilizzare un vincolo geometrico al posto di uno dimensionale, se possibile. Questo è legato al funzionamento interno del risolutore di Sketcher.

First Approach

As an example, take a square sketch. In the first screenshot, the sketch is fully constrained, but is using only dimensional, (distance), constraints. this is OK, but overly complicated, cluttered, and more math intensive for the solver. While this is not an issue with such a simple example, it can become one with more complex sketches.

File:Constrain1.png

A Better Way

The next screenshot is the same square, constrained using some geometric constraints. Using the horizontal and vertical geometric constraints, along with dimensional, (distance), constraints. By just using the horizontal and vertical geometric constraints, you can see the number of required dimensional constraints have been reduced. This is a better constrained sketch than the first, but is still not the optimum constraining scheme for this square.

File:Constrain2.png

Optimum Scheme

Now, in this last screenshot, there is only 1 dimensional, (distance), constraint, with the remaining constraints being geometrical. This is the best way to constrain this sketch. While with a simple sketch like this, one way or the other is no big deal, on larger and more complex sketches, sticking to the minimum dimensions rule will prove out to be beneficial to you and your endeavors constructing geometry with sketches. The geometrical constraints used in this sketch are horizontal, vertical, equal, and symmetry.

Additional Resources

Sketcher

Sketcher Tutorial