Sketcher Micro Tutorial - Constraint Practices/de: Difference between revisions

From FreeCAD Documentation
(Created page with "2. Klicke auf {{Button|16px Neue Skizze}}. :2.1. Wähle die Skizzenausrichtung, d.h. eine der Basisebenen XY,...")
(Created page with "3. Wir werden ein vollständig beschränktes Quadrat zeichnen, das am Ursprung zentriert ist. :3.1. Klicke auf {{Button|16px Sket...")
Line 40: Line 40:
== Erster Näherung: Bezugsbeschränkungen ==
== Erster Näherung: Bezugsbeschränkungen ==


3. Wir werden ein vollständig beschränktes Quadrat zeichnen, das am Ursprung zentriert ist.
3. We will draw a fully constrained square, centered at the origin.
:3.1. Click on {{Button|[[Image:Sketcher_CreatePolyline.svg‎‎|16px]] [[Sketcher_CreatePolyline|Create polyline]]}}, then trace four lines in the general shape of a rectangle around the origin.
:3.1. Klicke auf {{Button|[[Image:Sketcher_CreatePolyline.svg‎‎|16px]] [[Sketcher_CreatePolyline/de|Erstelle Polylinie]]}} und zeichne dann vier Linien in der allgemeinen Form eines Rechtecks um den Ursprung.


[[File:01a_Sk02_Sketcher_Rectangle_unconstrained.png|x400px]]
[[File:01a_Sk02_Sketcher_Rectangle_unconstrained.png|x400px]]

Revision as of 22:07, 12 September 2020

Tutorium
Thema
Skizzierer
Niveau
Anfänger
Zeit zum Abschluss
30 Minuten
Autoren
Mark Stephen (Quick61) und vocx
FreeCAD-Version
{{{FCVersion}}}
Beispieldateien
Skizzierer Beschränkungspraktiken
Siehe auch
None

Einführung

Dieses Tutorial wurde ursprünglich von Quick61 geschrieben, und es wurde von vocx neu geschrieben und neu illustriert.

Dieses Tutorium ist so gestaltet um dem neuen Anwender zu helfen, sich mit den bewährten Verfahren zur Beschränkung einer Skizze im Arbeitsablauf des Skizzierer Arbeitsbereichs vertraut zu machen.

Es gibt eine allgemeine Regel mit Beschränkungen: je weniger Bezugsbeschränkungen (Dimensionen), desto besser.

Vorzuziehen ist, wenn möglich, eine geometrische Beschränkung anstelle einer dimensionalen zu verwenden. Dies hat mit der internen Funktionsweise des Beschränkungslösers des Skizzierers zu tun.

Einrichtung

1. Öffne FreeCAD, erstelle ein neues leeres Dokument mit Datei → Neu.

1.1. Wechsle zum Skizzierer Arbeitsbereich über den Arbeitsbereich Wähler oder das Menü Ansicht → Arbeitsbereich → Skizzierer.

Einige Aktivitäten zum Erinnern:

  • Drücke die rechte Maustaste, oder drücke Esc einmal auf der Tastatur, um das aktive Werkzeug im Bearbeitungsmodus abzuwählen.
  • Um den Skizzenbearbeitungsmodus zu verlassen, drücke die Schließen Schaltfläche im Aufgabenpaneel oder drücke Esc zweimal auf der Tastatur.
  • Um den Bearbeitungsmodus erneut aufzurufen, doppelklicke auf die Skizze in der Baumansicht oder wähle sie aus und klicke dann auf Skizze bearbeiten.

Erstellen einer Skizze

2. Klicke auf Neue Skizze.

2.1. Wähle die Skizzenausrichtung, d.h. eine der Basisebenen XY, XZ oder YZ. Wir werden die Standardebene und -optionen verwenden.
2.2. Klicke OK, um mit der Konstruktion der Skizze zu beginnen.

Hinweis: im Augabenpaneel erweitere den Bedienelemente bearbeiten Abschnitt und stelle sicher, dass die Option Auto Beschränkungen deaktiviert ist. Schalte auch den Rasterfang aus und blende das Raster aus.

Erster Näherung: Bezugsbeschränkungen

3. Wir werden ein vollständig beschränktes Quadrat zeichnen, das am Ursprung zentriert ist.

3.1. Klicke auf Erstelle Polylinie und zeichne dann vier Linien in der allgemeinen Form eines Rechtecks um den Ursprung.

Unbeschränkte rechteckige Skizze.

3.2. Select one horizontal line, and press Horizontal distance, then enter 20 mm.
3.3. Select the other horizontal line, and repeat the constraint with the same distance.
3.4. Select one vertical line, and press Vertical distance, then enter 20 mm.
3.5. Select the other vertical line, and repeat the constraint with the same distance.
3.6. Select one bottom corner point (a), and the origin of the sketch, and press Horizontal distance, then enter 10 mm.
3.7. Select the top corner point (b) above the previous corner point (a), and the origin of the sketch, and repeat the horizontal constraint with the same distance.
3.8. Select the other bottom corner point (c), and the origin of the sketch, and press Vertical distance, then enter 10 mm.
3.9. Select the top corner point (b) again, and the origin of the sketch, and repeat the vertical constraint with the same distance.

Links: Bezugsbeschränkungen für die Seiten. Rechts: zusätzliche Bezugsbeschränkungen für die Innenabstände.

Looking at the Constraints section in the task panel, we see that the constraints are too many; they also clutter the view of the sketch. These constraints are also computationally intensive for the solver; while this is not an issue with a simple shape, it can become one with more complex shapes.

Ein besserer Weg: Bezugs und geometrische Beschränkungen

4. We will draw the same square fully constrained, and centered at the origin. When you create the new sketch, make sure the Auto constraints option is disabled.

4.1. Click on Create polyline, then trace four lines in the general shape of a rectangle around the origin.
4.2. Select one horizontal line, and press Horizontal.
4.3. Select the other horizontal line, and repeat the constraint.
4.4. Select one vertical line, and press Vertical.
4.5. Select the other vertical line, and repeat the constraint.

Geometrische horizontale und vertikale Beschränkungen.

4.6. Select one horizontal line, and press Horizontal distance, then enter 20 mm. We see that the other horizontal line changes size at the same time.
4.7. Select one vertical line, and press Vertical distance, then enter 20 mm. We see that the other vertical line changes size at the same time.
4.8. Select one bottom corner point (a), and the origin of the sketch, and press Horizontal distance, then enter 10 mm.
4.9. Select the top corner point (b) above the previous corner point (a), and the origin of the sketch, and press Vertical distance, then enter 10 mm.

Links: Bezugsbeschränkungen für nur zwei Seiten. Rechts: zusätzliche Bezugsbeschränkungen für nur zwei Innenabstände.

This is a better constrained sketch than the first one. The horizontal and vertical geometric constraints allow us to use fewer datum constraints, so our sketch looks less cluttered.

Optimales Schema: meist geometrische Beschränkungen

5. We will draw the same square fully constrained, and centered at the origin. When you create the new sketch, make sure the Auto constraints option is disabled.

5.1. Click on Create polyline, then trace four lines in the general shape of a rectangle around the origin.
5.2. Select one horizontal line, and press Horizontal.
5.3. Select the other horizontal line, and repeat the constraint.
5.4. Select one vertical line, and press Vertical.
5.5. Select the other vertical line, and repeat the constraint.

Geometrische horizontale und vertikale Beschränkungen.

5.6. Select one bottom corner point (a), then the top corner point that is diagonally opposite, and then the origin of the sketch; then press Symmetric. The two selected points will be equidistant from the origin.
5.7. Select two adjacent sides of the rectangle (connected at one corner), and press Equal length. Notice that due to the symmetry of the corner points, all sides are now of the same size.

Links: symmetrische Beschränkung für nur zwei Eckpunkte. Rechts: zusätzliche gleiche Längenabstände für nur zwei benachbarte Seiten.

5.8. Select one horizontal line, and press Horizontal distance, then enter 20 mm. Due to the symmetric and length equality constraints previously added, we see that all sides become equal at the same time.

Alle angewandten geometrischen Beschränkungen und eine einzige Bezugsbeschränkung für eine Seite.

Dies ist der beste Weg, diese Skizze zu beschränken, da wir nur eine Bezugs- (Bemaßungs-) Beschränkung verwendet haben.

Zusätzliche Quellen

Template:Tutorials navi/de