Sketcher CreateRectangle/pt

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This page is a translated version of the page Sketcher CreateRectangle and the translation is 10% complete.

Outdated translations are marked like this.

Other languages:

Polyline

Centered rectangle

Sketcher

Localização do menu
Sketcher CreateRectangle
Sketch → Sketcher geometries → Create rectangle
Bancadas de trabalho
Sketcher
Atalho padrão
R
Introduzido na versão
-
Veja também
Sketcher Polyline

Description

The Sketcher CreateRectangle tool creates a rectangle. introduced in version 0.22: The tool has four modes, two of which can also produce parallelograms. Rounded corners and creating an offset copy are optional features.

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters. introduced in version 0.22
Dim-OVP = Dimensional On-View-Parameters. introduced in version 0.22

There are several ways to invoke the tool:
- Press the Rectangle button.
- Select the Sketcher → Sketcher geometries → Create rectangle option from the menu.
- Right-click in the 3D view and select the Create rectangle option from the context menu.
- Use the keyboard shortcut: G then R.
The cursor changes to a white cross with the current tool mode icon.
The Rectangle parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
Optionally press the U key or check the Rounded corners checkbox to apply fillets to the rectangle. introduced in version 0.22
Optionally press the J key or check the Frame checkbox to create a second offset shape. introduced in version 0.22
Optionally press the M key or select from the dropdown list in the parameters section to change the tool mode:
- Corner, width, height:
  1. Pick the first corner of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
  2. Pick the opposite corner of the rectangle. Or with Dim-OVP: enter the width and/or height of the rectangle.
- Center, width, height: introduced in version 0.22
  1. Pick the center of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
  2. Pick a corner of the rectangle. Or with Dim-OVP: enter the width and/or height of the rectangle.
- 3 corners: introduced in version 0.22
  1. Pick the first corner of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
  2. Pick the endpoint of the first edge of the rectangle. Or with Dim-OVP: enter the length and/or angle of the first edge. The angle is relative to the X axis of the sketch.
  3. Pick the third corner, opposite the first, of the rectangle. Or with Dim-OVP: enter the length and/or angle of the second edge. The angle is relative to the first edge. Only if this angle is 90° will the result be a rectangle.
- Center, 2 corners: introduced in version 0.22
  1. Pick the center of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
  2. Pick the first corner of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
  3. Pick the second corner of the rectangle. Or with Dim-OVP: enter the length and/or angle of the edge between the first and the second corner. The angle is relative to the other edge connected to the first corner. Only if this angle is 90° will the result be a rectangle.
If Rounded corners is selected: Pick a point to define the fillet radius. Or with Dim-OVP: enter it.
If Frame is selected: Pick a point to define the offset distance. Or with Dim-OVP: enter it. If the offset is inward and larger than the radius, the offset shape will not have fillets.
The geometry is created and applicable Pos-OVP and Dim-OVP based constraints are added.
If the tool runs in continue mode:
1. Optionally keep creating rectangles.
2. To finish, right-click or press Esc, or start another geometry or constraint creation tool.