# Difference between revisions of "Sketcher CreatePolyline/ru"

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский

Sketcher Полилиния

Расположение в меню
Эскиз → Геометрия эскиза → Создать полилинию
Верстаки
Sketcher
Быстрые клавиши
отсутствуют
Представлено в версии
-
См. также
Sketcher Line

## Описание

This tool works like the Sketcher Line tool, but creates continuous line and arc segments connected by their vertices. When starting the tool, the mouse pointer changes to a white cross with a red polyline icon. The coordinates of the pointer are shown beside it in blue in real time.

Polyline started with a line, a tangent arc, a perpendicular arc then a tangent line

## How to use

The polyline always starts with a straight line segment: click - move the mouse - click. Move the mouse again. After placing the first line segment, the Sketcher polyline tool has multiple modes that can be toggled with the M key. For example you can draw tangent or perpendicular arcs following a line or arc segment. Repeatedly pressing the M key toggles through these different modes:

1. Press the M key: the new segment is a line which is perpendicular to the previous segment.
2. Press the M key again: the new segment is a line which is tangential to the previous segment.
3. Press the M key again: the new segment is an arc which is tangential to the previous segment.
4. Press the M key again: the new segment is an arc which is perpendicular (left) to the previous segment.
5. Press the M key again: the new segment is an arc which is perpendicular(right) to the previous segment.
6. Press the M key again: You are again in the state where you started; the line is only connected with a coincidence to the previous segment.
• v0.18 and above While in any of the arc modes, holding down the Ctrl key (MacOS: CMD key) and moving the cursor causes the arc to snap by increments of 45 degrees, relative to the previously created polyline segment.
• Pick points on an empty area of the 3D view, or on an existing object (auto constraints must be active in TaskView).
• Pressing Esc or clicking the right mouse button before closing the polyline to a loop ends the current polyline and you can continue with a new one. Pressing Esc or clicking the right mouse button again ends the polyline function.
• Pressing Esc or clicking the right mouse button after closing the polyline to a loop ends the polyline function.