Sketcher CreatePeriodicBSpline/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "''Периодическая кривая B-сплайна (белого цвета) состоит из 5 точек. На рисунке изображены контрол...")
(Created page with "==Как использовать==")
Line 19: Line 19:
''Периодическая кривая B-сплайна (белого цвета) состоит из 5 точек. На рисунке изображены контрольный многоугольник зеленого цвета (прямые, соединяющие красные точки), синие круги с весом и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (1) и (2) на узлах, лежащих на кривой, относятся к их множественности.''
''Периодическая кривая B-сплайна (белого цвета) состоит из 5 точек. На рисунке изображены контрольный многоугольник зеленого цвета (прямые, соединяющие красные точки), синие круги с весом и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (1) и (2) на узлах, лежащих на кривой, относятся к их множественности.''


==Как использовать==
==How to use==


# Press the {{KEY|[[File:Sketcher Create Periodic BSpline.svg|24px]] '''Create periodic B-spline'''}} button.
# Press the {{KEY|[[File:Sketcher Create Periodic BSpline.svg|24px]] '''Create periodic B-spline'''}} button.

Revision as of 01:45, 30 August 2019

Sketcher Нарисовать периодический B-сплайн

Системное название
Sketcher CreatePeriodicBSpline
Расположение в меню
Sketch → Геометрия эскизов → Нарисовать периодический B-сплайн
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Sketcher B-spline

Описание

Этот инструмент рисует периодическую (замкнутую) кривую B-сплайна по его контрольным точкам.

Периодическая кривая B-сплайна (белого цвета) состоит из 5 точек. На рисунке изображены контрольный многоугольник зеленого цвета (прямые, соединяющие красные точки), синие круги с весом и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (1) и (2) на узлах, лежащих на кривой, относятся к их множественности.

Как использовать

  1. Press the Create periodic B-spline button.
  2. Create a series of points by clicking in the 3D view. While the command is active, the created points are connected with straight lines, and a construction circle is created centred on each point.
  3. Pick the first curve point, or right-click to terminate the input and generate the curve.
  4. Depending on preferences, the tool may remain active to trace a new curve. Right-click again to exit the command.
  • It is possible to define the weight of the control points by changing the radii of the weight circles. The equality constraints on the circles need to be deleted first. The radius constraint is arbitrary, the weight of the control points will be defined by the relative radii of the circles. It works similar to gravity: the bigger a circle is in relation to the others, the more the curve will be attracted to the control point.
  • The visibility of the control polygon, the curvature comb, the degree and the knot multiplicity can be toggled on/off from the B-spline tools toolbar.
  • Check out the other tools in the B-spline tools toolbar for more B-spline editing tools.

Limitations

  • Many types of constraints are not supported at this time. Only the B-spline's control points and knots can be constrained.
  • Trimming and extend tools are not supported.
  • The shape of a B-spline curve can only be edited by dragging one of the control points. The knots lying on the curve cannot be selected.