Sketcher CreateFillet/sv
Outdated translations are marked like this.
|
|
| Menyplacering |
|---|
| Sketch → Sketcher geometries → Create fillet |
| Arbetsbänkar |
| Sketcher |
| Standard genväg |
| F |
| Introducerad i version |
| - |
| Se även |
| Ingen |
Description
The 
Sketcher CreateFillet tool creates a fillet between two non-parallel edges. introduced in version 0.22: The tool can also create a chamfer.
introduced in version 0.22: If two straight edges connected by a Coincident constraint are filleted or chamfered, the corner point can optionally be preserved by adding a Point object that has a Point on object constraint with both edges. Constraints connected to the corner point are then transferred to the new point object.
Usage
See also: Drawing aids.
- There are several ways to invoke the tool:
- Press the
Create fillet button. - Select the Sketcher → Sketcher geometries → Create fillet option from the menu.
- Right-click in the 3D view and select the Create fillet option from the context menu.
- Use the keyboard shortcut: G then F, then F.
- Press the
- If there is a previous selection it is cleared. The tool does not accept a pre-selection.
- The cursor changes to a white cross with the current tool mode icon.
- The Fillet/Chamfer parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
- Optionally press the U key or uncheck the Preserve corner checkbox to disable that option. introduced in version 0.22
- Optionally press the M key or select from the dropdown list in the parameters section to change the tool mode:
- Fillet
Chamfer
- Do one of the following:
- Pick a point with a Coincident constraint connecting two non-parallel straight edges.
- Pick two non-parallel edges. Either edge can be a straight line, an arc, an arc of ellipse, an arc of hyperbola or an arc of parabola. B-splines are currently not supported.
- The fillet or chamfer is created, including a point object in case of a preserved corner. For a chamfer a construction geometry arc is also created.
- This tool always runs in continue mode: optionally keep selecting points and/or edges.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Notes
- The construction geometry arc of a chamfer is not visible outside the sketch. It cannot be deleted without breaking the geometry of the chamfer.
- Some (conic) curves may need to be trimmed before they can be filleted.
- The fillet radius depends on the selection method. If a Coincident constraint connecting two straight edges is selected, the fillet radius is derived from the length of the shortest edge. If two edges are selected the radius is the distance from the first clicked point to the (extended) intersection of the edges.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub