Constraint Symmetric
Constraint Symmetric |
Menyplacering |
---|
Sketch → Sketcher constraints → Constrain symmetrical |
Arbetsbänkar |
Sketcher, PartDesign |
Standard genväg |
Ingen |
Introducerad i version |
- |
Se även |
Constraint Parallel |
Description
The Symmetrical Constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.
Usage
Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.
Click on Constrain symmetric or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item.
This will apply the constraint to the selected items.
Note: Before Version 0.19 (see fix [1]), if you want to define a symmetry constraint with respect to a point, the order of the selection is important, depending on if you select the tool at the beginning or at the end.
- If you click the tool first: select the first point, then the symmetry reference point, and finally the second point.
- If you click the tool last: select the first point, then the second point, and finally the symmetry reference point.
See the tracker issue #4144, and forum thread.
Scripting
Two points and a symmetry line:
Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line1, PointOfLine1, Line2, PointOfLine2, SymmetryLine))
Two points and a symmetry point:
Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line1, PointOfLine1, Line2, PointOfLine2, LineS, PointOfLineS))
A line and a symmetry point (In the GUI one can select a line and a point, but it uses internally the same form as above, with the two extremities of the same line):
Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line, 1, Line, 2, LineS, PointOfLineS))
The Sketcher scripting page explains the values which can be used for Line1
, Line2
, LineS
, Line
, PointOfLine1
, PointOfLine2
and PointOfLineS
, and contains further examples on how to create constraints from Python scripts.
- The tools: New sketch, Edit sketch, Leave sketch, View sketch, View section, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch
- Sketcher geometries: Point, Line by 2 point, Create an arc, Arc, Arc by 3 Point, Create a circle, Circle, Circle by 3 Point, Create a conic, Ellipse by center, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Create a B-spline, Create B-spline, Create periodic B-pline, Polyline (multiple-point line), Rectangle, Create regular polygon, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Create Regular Polygon, Slot, Fillet, Trimming, Extend, External Geometry, CarbonCopy, Construction Mode
- Sketcher constraints
- Geometric constraints Coincident, Point On Object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal Length, Symmetric, Constrain Block
- Dimensional constraints Lock, Horizontal Distance, Vertical Distance, Distance, Radius, Internal Angle, Snell's Law, Internal Alignment, Toggle reference/driving constraint,
- Sketcher tools Select solver DOFs, Close Shape, Connect Edges, Select Constraints, Select Origin, Select Vertical Axis, Select Horizontal Axis, Select Redundant Constraints, Select Conflicting Constraints, Select Elements Associated with constraints, Show/Hide internal geometry, Symmetry, Clone, Copy, Move, Rectangular Array, Delete All Geometry, Delete All Constraints
- Sketcher B-spline tools Show/Hide B-spline degree, Show/Hide B-spline control polygon, Show/Hide B-spline curvature comb, Show/Hide B-spline knot multiplicity, Convert Geometry to B-spline, Increase degree, Increase knot multiplicity, Decrease knot multiplicity
- Sketcher virtual space Switch Virtual Space
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Draft, FEM, Image, Inspection, Mesh, OpenSCAD, Part, PartDesign, Path, Points, Raytracing, Reverse Engineering, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Deprecated or unmaintained workbenches: Complete, Drawing, Robot
- Hubs: User hub, Power users hub, Developer hub