Sketcher "Ограничение симметричности"

From FreeCAD Documentation
Revision as of 23:26, 25 November 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Constraint Symmetric

Системное название
Constraint Symmetric
Расположение в меню
Sketch → Ограничения эскиза → Ограничение симметричности
Верстаки
Sketcher, PartDesign
Быстрые клавиши
Shift+P
Представлено в версии
-
См. также
Ограничение параллельности

Description

The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line. Alternatively it can constrain two points to be symmetric with respect to a third one.

Operation



Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.



Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item. This will apply the constraint to the selected items.



This is a geometric constraint and has no editable parameters.