Vazba souměrnosti

From FreeCAD Documentation
Revision as of 08:49, 26 September 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Constraint Symmetric

Umístění Menu
Sketch → Sketcher constraints → Constrain symmetrical
Pracovní stoly
Náčrt, Návrh dílu
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Vazba rovnoběžnosti

Description

Popis

Vazba souměrnosti zajistí, že dva vybrané body jsou souměrné podle zadané přímky, např. oba vybrané body budou ležet na kolmici k přímce procházející oběma body a budou stejně vzdálené od přímky. Případně oba body mohou být souměrně uloženy ke třetímu bodu.

Postup



Vyberte v náčrtu dva body (vrcholy) a přímku. Vybrané body a přímka změní barvu na tmavězelenou.



Klikněte na ikonu Vazba souměrnosti v nástrojovém pruhu Náčrtu nebo vyberte položku Vazba souměrnosti ze submenu Vazba souměrnosti z menu Náčrtu (nebo Návrh dílu). Tím aplikujete vazbu na vybrané položky.



Toto je geometrické vazba a nemá žádné parametry.

Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.

Click on Constrain symmetric or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item.

This will apply the constraint to the selected items.

Note: if you want to define a symmetry constraint with respect to a point, the order of the selection is important, depending on if you select the tool at the beginning or at the end.

  • If you click the tool first: select the first point, then the symmetry reference point, and finally the second point.
  • If you click the tool last: select the first point, then the second point, and finally the symmetry reference point.

See the tracker issue #4144, and forum thread.