|Sketcher → Constrain symmetrical|
|Introduced in version|
The symmetrical constraint constrains two selected points to be symmetrical around a given line, i.e., both selected points are constrained to lie on a normal to the line through both points and are constrained to be equidistant from the line.
Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.
Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item. This will apply the constraint to the selected items.
This is a geometric constraint and has no editable parameters.