Constraint Radius

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher ConstrainRadius and the translation is 0% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский

Constraint Radius.svg Constraint Radius

Veja também
Sketch → Sketcher constraints → Constrain radius
Bancadas de trabalho
Sketcher, PartDesign
Atalho padrão
Veja também
Constraint Distance, Constraint Horizontal, Constraint Vertical


This constraint constrains the value of the radius of a circle or arc to have a specific value. If more than one circle or arc is selected before launching the command, a prompt will ask if all selected elements should share the same radius. In the case of an affirmative response, one radius constraint will be added, and equal length constraints will be added to all elements. In the negative, separate radius constraints will be created for each circle/arc but with equal values to be edited separately after creation.

Sketcher ConstrainRadius example.png


  1. Pick one or more circles or arcs.
  2. Press the Sketcher ConstrainRadius.svg Constrain radius button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
  4. Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.

Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.