Sketcher ConstrainRadius/fr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "{{GuiCommand/fr|Name=Constraint Radius|Name/fr=Contrainte Radiale|Workbenches=Sketcher, PartDesign|MenuLocation=Sketch ...")
Line 1: Line 1:
{{GuiCommand|Name=Constraint Radius|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Workbench|PartDesign]]|MenuLocation=Sketch → Sketcher constraintsConstrain radius|SeeAlso=[[Constraint Length|Constraint Distance]], [[Constraint Horizontal]], [[Constraint Vertical]]}}
{{GuiCommand/fr|Name=Constraint Radius|Name/fr=Contrainte Radiale|Workbenches=[[Sketcher Workbench/fr|Sketcher]], [[PartDesign Workbench/fr|PartDesign]]|MenuLocation=Sketch → Contraintes d'esquisseContrainte radiale|Shortcut=R|SeeAlso=[[Constraint Length/fr|Contrainte Distance]], [[Constraint Horizontal/fr|Contrainte Horizontale]], [[Constraint Vertical/fr|Contrainte Verticale]]}}


====Description====
====Description====

Revision as of 21:18, 21 December 2013

Contrainte Radiale

Emplacement du menu
Sketch → Contraintes d'esquisse → Contrainte radiale
Ateliers
Sketcher, PartDesign
Raccourci par défaut
R
Introduit dans la version
-
Voir aussi
Contrainte Distance, Contrainte Horizontale, Contrainte Verticale

Description

This constraint constrains the value of the radius of a circle or arc to have a specific value. Only one arc or circle can be constrained at a time.


Operation


Select an arc or circle in the sketch by clicking on is ( turns dark green to indicate selection).

Apply the constraint by clicking on the Constrain Radius icon in the Sketcher toolbar or selecting the Constrain radius menu item from the Sketcher constraints sub menu of the the Sketcher (or Part Design) menu item (depending upon which workbench is selected).

The radius is constrained to have its current value when the constraint is applied.
To change the constraint value either double click on the constraint in the 3D display (turning red indicates the constraint is currently selected) or by double clicking on the constraint in the Constraints panel of the Tasks tab of the Combo View.
This will bring up a pop-up window.

Enter the desired value for the radius into the pop-up window and click OK to set the value of the constraint.

The constraint value is set to the value entered in the pop-up window.