Sketcher ConstrainParallel/pt-br: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 5: Line 5:
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Constraint_Horizontal.svg
|IconL=Constraint_Horizontal.svg
|IconR=Constraint_Perpendicular.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
|IconR=Constraint_Perpendicular.png
}}
}}


Line 41: Line 41:
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Constraint_Horizontal.svg
|IconL=Constraint_Horizontal.svg
|IconR=Constraint_Perpendicular.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
|IconR=Constraint_Perpendicular.png
}}
}}



Revision as of 17:30, 13 December 2020

Constraint Parallel

Veja também
Sketch → Sketcher constraints → Constrain parallel
Bancadas de trabalho
Sketcher, PartDesign
Atalho padrão
Nenhum
Introduzido na versão
-
Veja também
Constraint Vertical, Constraint Horizontal

Description

The Constrain Parallel constraint forces two selected straight lines or edges to be parallel to each other.

Operation

The sketch contains two randomly oriented lines.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by either:

  • Pressing the Constrain parallel button from the Sketcher constraints toolbar by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.
  • Use the Shift + P keyboard shortcut.
  • Use the Sketch → Sketcher constraints → Constrain parallel entry from the top menu.

Result: The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.