Sketcher: Vincolo Parallela

From FreeCAD Documentation
Revision as of 21:24, 21 December 2013 by Renatorivo (talk | contribs) (Created page with "Il disegno contiene due linee orientate in modo casuale.")

{{GuiCommand|Name=Constraint Parallel|Workbenches=Sketcher, [[PartDesign

Parallela

Posizione nel menu
PartDesign → Schizzo → Parallela
Ambiente
Schizzo, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Verticale, Orizzontale

Il vincolo Parallela costringe due linee rette o due bordi selezionati a essere paralleli tra loro.

Il disegno contiene due linee orientate in modo casuale.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.