Croquizador RestringirParallel

From FreeCAD Documentation
Revision as of 21:29, 21 December 2013 by Renatorivo (talk | contribs) (Created page with "====Descripción==== La Restricción Paralela fuerza que dos líneas rectas o aristas sean paralelas entre sí.")

{{GuiCommand|Name=Constraint Parallel|Workbenches=Sketcher, [[PartDesign

Constraint Parallel

Ubicación en el Menú
Croquizador → Restricciones del Croquizador → Paralela
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Vertical, Horizontal

Descripción

La Restricción Paralela fuerza que dos líneas rectas o aristas sean paralelas entre sí.

Operation

The sketch contains two randomly oriented lines.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.