Difference between revisions of "Sketcher ConstrainParallel"

From FreeCAD Documentation
Jump to navigation Jump to search
m (Languages spanish)
(fixed links in GuiCommand)
Line 1: Line 1:
{{GuiCommand|Name=Constraint Parallel|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Module|PartDesign_Workbench]]|MenuLocation=Sketcher → Constrain parallel|SeeAlso=[[Constraint vertical]], [[Constraint horizontal]]}}
{{GuiCommand|Name=Constraint Parallel|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Workbench|PartDesign]]|MenuLocation=Sketch → Sketcher constraints → Constrain parallel|SeeAlso=[[Constraint Vertical]], [[Constraint Horizontal]]}}

Revision as of 03:32, 21 March 2012

Constraint Parallel.svg Constraint Parallel

Menu location
Sketch → Sketcher constraints → Constrain parallel
Sketcher, PartDesign
Default shortcut
Introduced in version
See also
Constraint Vertical, Constraint Horizontal


The Constrain Parallel constraint forces two selected straight lines or edges to be parallel to each other.


The sketch contains two randomly oriented lines.


Select both lines by clicking successively on each of them.


Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon Sketcher ConstrainParallel.png from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.


The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.

Available translations of this page: Flag-es.jpg