Sketcher ConstrainParallel: Difference between revisions

From FreeCAD Documentation
m (Normandc moved page Constraint Parallel to Sketcher ConstrainParallel without leaving a redirect: Part of translatable page "Constraint Parallel")
(Rename command to internal name)
Line 2: Line 2:
<translate>
<translate>
<!--T:10-->
<!--T:10-->
{{GuiCommand
{{GuiCommand|Name=Constraint Parallel|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Workbench|PartDesign]]|MenuLocation=Sketch → Sketcher constraints → Constrain parallel|SeeAlso=[[Sketcher ConstrainVertical|Constraint Vertical]], [[Sketcher ConstrainHorizontal|Constraint Horizontal]]}}
|Name=Sketcher ConstrainParallel
|Workbenches=[[Sketcher Workbench|Sketcher]]
|MenuLocation=Sketch → Sketcher constraints → Constrain parallel
|SeeAlso=[[Sketcher ConstrainVertical|Constraint Vertical]], [[Sketcher ConstrainHorizontal|Constraint Horizontal]]
}}


====Description==== <!--T:2-->
====Description==== <!--T:2-->

Revision as of 02:55, 1 October 2018

Sketcher ConstrainParallel

Menu location
Sketch → Sketcher constraints → Constrain parallel
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
Constraint Vertical, Constraint Horizontal

Description

The Constrain Parallel constraint forces two selected straight lines or edges to be parallel to each other.

Operation

The sketch contains two randomly oriented lines.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.