Sketcher ConstrainHorizontal/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "{{GuiCommand/it|Name=Constraint Horizontal|Name/it=Orizzontale|Workbenches=Schizzo, PartDesign|MenuLocation=PartDesign ...")
Line 1: Line 1:
{{GuiCommand|Name=Constraint Horizontal|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign Workbench|PartDesign]]|MenuLocation=SketchSketcher constraintsConstrain horizontally|SeeAlso=[[Constraint Vertical]]}}
{{GuiCommand/it|Name=Constraint Horizontal|Name/it=Orizzontale|Workbenches=[[Sketcher Workbench/it|Schizzo]], [[PartDesign Workbench/it|PartDesign]]|MenuLocation=PartDesignSchizzoOrizzontale|SeeAlso=[[Constraint Vertical/it|Verticale]]}}


====Description====
====Description====

Revision as of 20:22, 21 December 2013

Orizzontale

Posizione nel menu
PartDesign → Schizzo → Orizzontale
Ambiente
Schizzo, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Verticale

Description

The Horizontal Constraint forces a selected line or lines in the image to be parallel to the horizontal axis of the sketch.

Operation

Select a line in the sketch by clicking on it.

The line turns dark green.

Apply the Horizontal Constraint by clicking on the Horizontal Constraint icon in the Sketcher Constraints toolbar or by selecting the Constrain horizontally menu item in the Sketcher constraints sub menu of the Sketcher menu item in the Sketcher work bench (or the Part Design menu item of the Part Design work bench). The selected line is constrained to be parallel to the horizontal axis of the sketch.

Multiple lines may be selected,

and then applying the constraint as described above, they are constrained to be parallel to the sketch horizontal axis.