Sketcher Contrainte horizontale

From FreeCAD Documentation
Revision as of 12:07, 29 September 2020 by David69 (talk | contribs) (Replaced content with "500px {{Caption|Sélectionnez une ligne dans l'esquisse en cliquant dessus.}}")

Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.

Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.

Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.

Sketcher_Contrainte horizontale

Emplacement du menu
Sketch → Contraintes d'esquisse → Contrainte horizontale
Ateliers
Sketcher
Raccourci par défaut
H
Introduit dans la version
-
Voir aussi
Sketcher Contrainte verticale

Description

La contrainte horizontale oblige une ligne sélectionnée ou des lignes dans l'esquisse à être parallèles à l'axe horizontal de l'esquisse.

Utilisation

Sélectionnez une ligne dans l'esquisse en cliquant dessus.

The line turns dark green.

Apply the Horizontal Constraint by clicking on the Constraint horizontal in the Sketcher Constraints toolbar or by selecting the Constrain horizontally menu item in the Sketcher constraints sub menu of the Sketcher menu item in the Sketcher work bench (or the Part Design menu item of the Part Design work bench). The selected line is constrained to be parallel to the horizontal axis of the sketch.

Multiple lines may be selected

and then applying the constraint as described above, they are constrained to be parallel to the sketch horizontal axis.