スケッチャーSketcher ConstrainEqual

From FreeCAD Documentation
Revision as of 15:23, 15 December 2018 by Luc (talk | contribs) (Created page with "ConstrainEqualはライン、ポリライン、長方形に含まれる複数の線分が等しい長さになるように拘束を行います。円弧や円に対して適...")
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎日本語

Template:GuiCommand/jp

説明

ConstrainEqualはライン、ポリライン、長方形に含まれる複数の線分が等しい長さになるように拘束を行います。円弧や円に対して適用した場合はその半径が等しくなるように拘束を行います。異なるタイプの幾何プリミティブ間(例えば線分と円弧)に適用することはできません。

Operation

The example sketch below contains a number of sketch primitives ( line,poly-line, rectangle, arc and circle).

EqualConstraint1.png

Select two or more line segments (e.g. line and one side of the rectangle).

EqualConstraint2.png

Click on the Constrain Equal icon Sketcher ConstrainEqual.png in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.

EqualConstraint3.png

Now select the arc and the circle in the sketch.

EqualConstraint4.png

and apply the Constrain Equal Sketcher ConstrainEqual.png constraint as before.

EqualConstraint5.png

Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle

EqualConstraint6.png

and apply the Constrain Equal Sketcher ConstrainEqual.png constraint as before.

EqualConstraint7.png

Select the line segment and the arc

EqualConstraint8.png

and apply the Constrain Equal Sketcher ConstrainEqual.png constraint as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).

EqualConstraint9.png