Sketcher ConstrainEqual/it: Difference between revisions
Renatorivo (talk | contribs) mNo edit summary |
(Updating to match new version of source page) |
||
Line 1: | Line 1: | ||
⚫ | |||
== Sketcher: Vincolo Uguale == |
|||
⚫ | |||
⚫ | |||
The Constrain Equal constraint forces two or more line segments in a line , poly-line or rectangle to have equal length. If applied to arcs or circles the radii are constrained to be equal. It cannot be applied to geometry primitives which are not of the same type (e.g. line segments and arcs). |
|||
Il vincolo Uguale forza due o più segmenti di linea in una linea, in una polilinea o in un rettangolo ad avere uguale lunghezza. Se applicato a archi o cerchi, vincola uguali i raggi. Non può essere applicato a geometrie primitive che non sono dello stesso tipo, ad esempio segmenti con archi. |
|||
⚫ | |||
Lo schizzo dell'esempio seguente contiene una serie di primitive di disegno (linea, polilinea, rettangolo, arco e cerchio). |
|||
⚫ | |||
Selezionare due o più segmenti di linea (ad esempio una linea e un lato del rettangolo). |
|||
⚫ | |||
Fare clic sulla icona [[File:Constraint_EqualLength.png|16px]] nella barra degli strumenti di vincolo o selezionare il vincolo Uguali dal sottomenu dell'ambiente Schizzo (o quello dell'ambiente Parte). |
|||
⚫ | |||
Ora selezionare l'arco e il cerchio nel disegno. |
|||
⚫ | |||
⚫ | |||
⚫ | |||
Ora selezionare il segmento di linea, tutti i segmenti della poli-linea e uno dei lati non ancora vincolati del rettangolo |
|||
⚫ | |||
⚫ | |||
⚫ | |||
Selezionare il segmento di retta e l'arco |
|||
⚫ | |||
e applicare il vincolo [[File:Constraint_EqualLength.png|16px]] come in precedenza. |
|||
Una finestra di messaggio ricorda che gli elementi da vincolare devono essere dello stesso tipo geometrico (linee di curvatura pari a zero o linee con curvatura diversa da zero). |
|||
====Operation==== |
|||
The example sketch below contains a number of sketch primitives ( line,poly-line, rectangle, arc and circle).<br /><br /> |
|||
⚫ | |||
Select two or more line segments (e.g. line and one side of the rectangle).<br /><br /> |
|||
⚫ | |||
Click on the Constrain Equal icon [[File:Constraint_EqualLength.png|16px]] in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.<br /><br /> |
|||
⚫ | |||
Now select the arc and the circle in the sketch.<br /><br /> |
|||
⚫ | |||
⚫ | |||
⚫ | |||
Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle <br /><br /> |
|||
⚫ | |||
⚫ | |||
⚫ | |||
Select the line segment and the arc<br /><br /> |
|||
⚫ | |||
and apply the Constrain Equal [[File:Constraint_EqualLength.png|16px]] constraint as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).<br /><br /> |
|||
[[File:EqualConstraint9.png|256px]] |
[[File:EqualConstraint9.png|256px]] |
||
<languages/> |
|||
{{languages/it | {{en|Constraint_EqualLength}} {{es|Constraint_EqualLength/es}} {{fr|Constraint_EqualLength/fr}} }} |
Revision as of 17:17, 22 December 2013
Constraint EqualLength |
Menu location |
---|
Sketch → Sketcher constraints → Constrain equal |
Workbenches |
Sketcher, PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
Constraint Radius |
Description
The Constrain Equal constraint forces two or more line segments in a line , poly-line or rectangle to have equal length. If applied to arcs or circles the radii are constrained to be equal. It cannot be applied to geometry primitives which are not of the same type (e.g. line segments and arcs).
Operation
The example sketch below contains a number of sketch primitives ( line,poly-line, rectangle, arc and circle).
Select two or more line segments (e.g. line and one side of the rectangle).
Click on the Constrain Equal icon in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.
Now select the arc and the circle in the sketch.
and apply the Constrain Equal constraint as before.
Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle
and apply the Constrain Equal constraint as before.
Select the line segment and the arc
and apply the Constrain Equal constraint as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).