Vazba Svislé vzdálenosti

From FreeCAD Documentation
Revision as of 16:12, 30 December 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Sketcher ConstrainDistanceY

Umístění Menu
Sketch → Sketcher geometries → Constrain vertical distance
Pracovní stoly
Náčrt
Výchozí zástupce
Shift+V
Představen ve verzi
-
Viz také
Vazba vodorovné vzdálenosti, Vazba délky

Popis

Zafixuje svislou vzdálenost mezi 2 body nebo konci přímek. Je-li vybrána pouze jedna položka, bude vzdálenost nastavena na původní hodnotu.

Fixes the vertical distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Použití

  1. Vyberte jeden nebo dva body
  2. Aktivujte vazbu
  1. Pick one or two points or one line.
  2. Invoke the command several ways:
    • Press the Constrain vertical distance button.
    • Use the Shift + V keyboard shortcut. (V is for Vertical)
    • Use the Sketch → Sketcher constraints → Constrain vertical distance entry from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.