Sketcher ConstrainDistanceX

From FreeCAD Documentation
Revision as of 13:32, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский
Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock

Sketcher ConstrainDistanceX.svg Sketcher ConstrainDistanceX

Veja também
Sketch → Sketcher constraints → Constrain horizontal distance
Bancadas de trabalho
Atalho padrão
Shift + H
Veja também
Constraint Length, Constraint VerticalDistance


Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Constraint H Distance.png

How to use

  1. Pick one or two points or one line.
  2. Press the Sketcher ConstrainDistanceX.png Constrain horizontal distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.

Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock