Restricción de distancia horizontal

From FreeCAD Documentation
Revision as of 18:17, 14 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский
Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock

Sketcher ConstrainDistanceX.svg Restricción de distancia horizontal

Ubicación en el Menú
Sketch → Restricciones de croquis → Restricción de distancia horizontal
Entornos de trabajo
Atajo de teclado por defecto
May + H
Introducido en versión
Ver también
Restricción de longitud, Restricción de distancia vertical


Fija la distancia horizontal entre dos puntos o los fines de una línea. Si sólo un objeto es seleccionado, la distancia se fija respecto al origen.

Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Constraint H Distance.png


  1. Selecciona uno o dos puntos
  2. Activa la restricción
  1. Pick one or two points or one line.
  2. Invoke the tool several ways:
    • Press the Sketcher ConstrainDistanceX.png Constrain horizontal distance button in the toolbar.
    • Use the Shift + H keyboard shortcut. (H is for Horizontal)
    • Use the Sketch → Sketcher constraints → Constrain horizontal distance from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.

Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock