Sketcher "Соединить края"

From FreeCAD Documentation
Revision as of 10:12, 16 December 2020 by Baritone (talk | contribs)

Sketcher ConnectLines

Системное название
Sketcher ConnectLines
Расположение в меню
Sketch → Инструменты для эскиза → Соединить элементы
Верстаки
Sketcher
Быстрые клавиши
Ctrl+Shift+K
Представлено в версии
0.15
См. также
Sketcher ConstrainCoincident

Description

Applies Coincident constraints to endpoints with the same coordinates of the selected elements.

Usage

  1. Select the elements in the 3D view or in the Task panel on the left side of the screen
  2. Invoke the command using several methods:
    • Press the Connect lines button.
    • Use the Ctrl + Shift + K keyboard shortcut.
    • Use the Sketch → Sketcher tools → Connect Edges entry from the top menu.

Notes

Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. Selecting the elements in a counter-clock-wise order seems to produce better results.