Sketcher Copie carbone

From FreeCAD Documentation
Revision as of 04:20, 12 November 2018 by Normandc (talk | contribs) (Created page with "Copie Sketcher")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Sketcher CarbonCopy

Menu location
Sketch → Sketcher geometries → CarbonCopy
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.17
See also
None


Description

The CarbonCopy tool copies all the geometry and constraints from another sketch into the active sketch. Dimensional constraints remain linked to the original sketch's dimensional constraints through expressions.


How to use

  1. Press the CarbonCopy button.
  2. Click on an edge from the other sketch.
  3. Geometry elements as well as constraints are copied into the sketch.
  4. Press ESC or press the right mouse button to terminate the function.

Limitations

  • All the content of the sketch is copied; it is not possible to select only a portion of it.
  • Both sketch planes need to be parallel to each other.