SheetMetal SketchOnSheet: Difference between revisions
mNo edit summary |
m (Less clutter) |
||
Line 24: | Line 24: | ||
<!--T:4--> |
<!--T:4--> |
||
The |
The [[Image:SheetMetal_SketchOnSheet.svg|16px]] [[SheetMetal_SketchOnSheet|Sketch On Sheet metal]] command cuts holes along the folded walls of a sheet metal object. For the hole layout a [[Image:Workbench_Sketcher.svg|16px]] [[Sketcher_Workbench|sketch]] is used. |
||
In contrast to the |
In contrast to the [[Image:PartDesign_Pocket.svg|16px]] [[PartDesign_Pocket|PartDesign Pocket]] command, where holes are just cut along the sketch normal (local z axis), this tool acts as if it would unfold the sheet metal object, cut the holes, and refold the object. |
||
== Usage == <!--T:5--> |
== Usage == <!--T:5--> |
Revision as of 20:20, 7 August 2021
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
SheetMetal SketchOnSheet |
Menu location |
---|
SheetMetal → Sketch On Sheet metal |
Workbenches |
SheetMetal |
Default shortcut |
M S |
Introduced in version |
- |
See also |
None |
Description
The Sketch On Sheet metal command cuts holes along the folded walls of a sheet metal object. For the hole layout a sketch is used.
In contrast to the PartDesign Pocket command, where holes are just cut along the sketch normal (local z axis), this tool acts as if it would unfold the sheet metal object, cut the holes, and refold the object.
Usage
- Select a planar face
- Select a coplanar sketch (i.e. lying on the same plane) for the hole layout (preferably from the tree view).
- (Note: Don't forget the Control/Command key!)
- Press the Sketch On Sheet metal button
or use the keyboard shortcut: M then S
Notes
- The sketch may contain more than just one outline.
- Any outline has to touch the planar face, at least, otherwise it won't cut a hole at all.
Properties
Data
Base
Parameters
View
Base
Display Options
Object Style
Selection
Example
A simple thingamajg
Preparation
This thingamajg is made of a folded sheet metal object with holes added.
And so one open contour sketch for the sheet metal and one sketch for the hole layout have to be prepared in advance.
One straight line of the first sketch must be coplanar to the other sketch plane,
this will result in coplanar sketch and face used in the next steps.
Just a contour and a hole layout
Workflow
- Create a folded sheet metal object
- Select the contour sketch
- Press the Make Base Wall button
or use the keyboard shortcut: C then F
- Select the contour sketch
- Cut some holes
- Select the planar face
- Select the hole layout sketch
- Press the Sketch On Sheet metal button
or use the keyboard shortcut: M then S
Done!
- Some hints
- Check if the folded object's thickness is built to the right side.
The yellow contour should lie on the top face of the bottom fold (as shown).
To reverse direction set the value of Bend Side property (Outside <-> Inside).
- Hole shapes not touching the used planar face won't cut holes into the folded object.
The lower rectangle which is hardly touching said face does cut a hole while the upper slot shape doesn't.
- Check if the folded object's thickness is built to the right side.