SheetMetal AddWall

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

SheetMetal Workbench

SheetMetal Bend
Menu location
SheetMetal → Add Bend
Workbenches
SheetMetal
Default shortcut
None
Introduced in version
-
See also
None

Description

The SheetMetal workbench Bend tool creates a bend on the selected edge.

Usage

To add a Bend:

1. Switch to the SheetMetal Workbench.
2. Start with a base plate or sheet, select one or more edges to receive a bend.
3. Click on the Bend tool to add a bend.

Note: The workbench does not have a tool to create a base plate, so you need to start your model with one of the following methods:

• Method 1: Part Cube
• Method 2: An extruded solid made with Part Extrude from either a:

• Draft Rectangle or a
• Draft Wire or a
• Sketch
• Use Part Thickness to create shell (Typically with the thickness value of the sheet metal.)

• Method 3: PartDesign Body containing either an

• additive box or a
• PartDesign Pad made from a Sketch.
• Use PartDesign Thickness to create shell (Typically with the thickness value of the sheet metal.)

If you start with a PartDesign Body, you can mix Sheet Metal features with PartDesign features such as pockets or holes.

Properties

Data

Base

• DataLabel: User name of the object in the Tree view.

Parameters

• Dataradius: Bend radius.
• Datathickness: Thickness of bend (Typically needs to match thickness of the sheet metal.).

Limitations

Limitation are not known yet.

SheetMetal Workbench