Rocket Cloison
|
|
| Menu location |
|---|
| Rocket → Bulkhead |
| Workbenches |
| Rocket Workbench |
| Default shortcut |
| None |
| Introduced in version |
| 0.19 |
| See also |
| None |
Description
A bulkhead is a solid section of material used to close off a section of body tube, or to provide a base for a nose cone.
Usage
- There are several ways to invoke the command:
- Press the
Bulkhead button. - Select the Rocket → Bulkhead option from the menu.
- Double click on a Bulkhead object in the model view.
- Press the
- Set options and press OK.
Options
Step
Bulkheads may include a step.
A step may be thought of as an additional bulkhead of smaller diameter stacked on top of the original bulkhead. The most common use is to cap the end of a body tube, such as for an electronics bay. In this case the outer diameter of the bulkhead would match the outer diameter of the body tube, and the outer diameter of the step would match the inner diameter of the body tube.
A stepped bulkhead used to cap a body tube
Holes
A bulkhead may require holes for a variety of reasons, such as for attaching an eye hook. This tool allows you to specify one or more identical holes applied in a radial pattern.
A stepped bulkhead with 4 holes
Properties
Rocket Component
These parameters are provided for information and have no effect on the design of the component.
- DonnéesManufacturer: Manufacturer when known
- DonnéesPart Number: Manufacturer part number
- DonnéesDescription: Description of the component
- DonnéesMaterial: Material when known
Bulkhead
- DonnéesDiameter: The outer diameter of the bulkhead
- DonnéesThickness: The thickness, not including any step, of the bulkhead
- DonnéesStep: True when the bulkhead includes a step, see Options
- DonnéesStep Diameter: The outer diameter of the step
- DonnéesStep Thickness: The thickness, not including the bulkhead thickness, of the step
- DonnéesHoles: True when the the bulkhead has one or more holes, see Options
- DonnéesHole Diameter: The diameter of the hole
- DonnéesHole Center: The distance from the center of the hole to the center of the bulkhead
- DonnéesHole Count: The number of holes applied in a radial pattern around the center of the bulkhead
- DonnéesHole Offset: Offset from 0 degrees of the first hole
Scripting
See also: Category:API and FreeCAD Scripting Basics.
TBD
Tutorials and Learning
Rocket Workbench Body Tubes, Bulkheads, and Centering Rings Tutorial on YouTube
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test, Web