Robot tutorial

From FreeCAD Documentation
Revision as of 20:40, 22 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский • ‎中文(简体)‎
Freecad.svg Руководство
Robot Workbench
Время для завершения
Not provided
FreeCAD версия
Примеры файлов


This tutorial is here to teach you how to use the Workbench Robot.svg Robot Workbench to simulate a robot cell set-up.

Before you begin

This tutorial is written for FreeCAD Version 0.16.6703 or higher. So if you don't have FreeCAD on your computer go to the Download page and do the installation.

This tutorial is targeting on the use of industrial robots and not mobile or service robots (see here).

Setting up a trajectory

  1. Switch to the Workbench Robot.svg Robot Workbench
  2. Activate the model-tab in the tree view by clicking on it
  3. Create a new trajectory by clicking on the Robot CreateTrajectory.svg Robot CreateTrajectory button
  4. Select the robot in the tree view
  5. Set home position for robot by clicking on Robot SetHomePos.svg Robot_SetHomePos
  6. Switch to the Task Panel
  7. By using the sliders change robot position
  8. When robot and trajectory are selected in tree view clicking on Robot InsertWaypoint.svg Robot InsertWaypoint will insert the way-point in the trajectory
  9. Each way-point is shown with a yellow cross, the waypoints are connected with orange lines
  10. Define at least three different way points and insert them in the trajectory

Simulating robot movement

  1. Select robot and trajectory in tree view
  2. Select simulation by clicking on Robot Simulate.svg Robot Simulate
  3. Click on Play button
  4. Watch simulation

Robot Tutorial RobotSimulation.gif