Robot 6-Axis

From FreeCAD Documentation
Revision as of 20:19, 19 September 2009 by Jriegel (talk | contribs) (→‎Kinematic)

This Article is about bringing a Standard 6-Axis industry robot into FreeCAD for simulation

The description follows the Denavit-Hartenberg Parameter system, as also described in John J. Craigs book "Introduction to Robotics".

Example Kuka

The Kuka KR-16


Kinematic

3D applications
Segment Parameter Description
Base konfiguration

Failed to parse (syntax error): {\displaystyle \alpha_{1} = −90} °

Segment 1

°

°

Segment 2

°

Segment 3

°

Segment 4

°

Segment 5

°

Segment 6

This leads to following table:

3D applications
Segment Parameter Description
Base konfiguration