Robot 6-Axis

From FreeCAD Documentation
Revision as of 18:14, 19 September 2009 by Jriegel (talk | contribs) (Created page with 'This Article is about bringing a Standard 6-Axis industry robot into FreeCAD for simulation The description follows the [http://en.wikipedia.org/wiki/Denavit-Hartenberg_Paramete…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This Article is about bringing a Standard 6-Axis industry robot into FreeCAD for simulation

The description follows the Denavit-Hartenberg Parameter system, as also described in John J. Craigs book "Introduction to Robotics".

Example Kuka

Retrieved from "http://wiki.freecad.org/index.php?title=Robot_6-Axis&oldid=2522"