Reverse Engineering Workbench: Difference between revisions

From FreeCAD Documentation
mNo edit summary
No edit summary
Line 3: Line 3:
<!--T:7-->
<!--T:7-->
{{Docnav
{{Docnav
|[[Raytracing Workbench|Raytracing Workbench]]
|[[Raytracing_Workbench|Raytracing Workbench]]
|[[Robot Workbench|Robot Workbench]]
|[[Robot_Workbench|Robot Workbench]]
|IconL=Workbench_Raytracing.svg
|IconL=Workbench_Raytracing.svg
|IconR=Workbench_Robot.svg
|IconR=Workbench_Robot.svg
Line 13: Line 13:


== Introduction == <!--T:1-->
== Introduction == <!--T:1-->
The [[Image:Workbench_Reverse_Engineering.svg|24px]] [[Reverse Engineering Workbench]] is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.
The [[Image:Workbench_Reverse_Engineering.svg|24px]] [[Reverse_Engineering_Workbench|Reverse Engineering Workbench]] is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.


<!--T:4-->
<!--T:4-->
Line 31: Line 31:
<!--T:2-->
<!--T:2-->
{{Docnav
{{Docnav
|[[Raytracing Workbench|Raytracing Workbench]]
|[[Raytracing_Workbench|Raytracing Workbench]]
|[[Robot Workbench|Robot Workbench]]
|[[Robot_Workbench|Robot Workbench]]
|IconL=Workbench_Raytracing.svg
|IconL=Workbench_Raytracing.svg
|IconR=Workbench_Robot.svg
|IconR=Workbench_Robot.svg

Revision as of 21:44, 1 December 2020

Reverse Engineering workbench icon

Introduction

The Reverse Engineering Workbench is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.

At the moment there is no functionality present in this workbench. It is used as a sandbox by the programmers.

Tools

The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.

  • Approximate a B-spline surface:


Development

Link to appropriate threads discussing this workbench