Reinforcement Workbench: Difference between revisions

From FreeCAD Documentation
No edit summary
(Marked this version for translation)
(22 intermediate revisions by 7 users not shown)
Line 2: Line 2:
<translate>
<translate>


<!--T:1-->
[[Image:Reinforcement_Workbench.svg|thumb|128px|Reinforcement workbench icon]]
[[Image:Reinforcement_Workbench.svg|thumb|128px|Reinforcement workbench icon]]


Line 8: Line 9:
<translate>
<translate>


== Introduction ==
== Introduction == <!--T:2-->


<!--T:3-->
The [[Reinforcement Workbench|Reinforcement workbench]] is an [[External workbenches|external workbench]] which provides tools for Reinforcement Generation and Detailing. This workbench provides interface and presets for the creation of common rebar types. And tools to generate rebars bill of material, rebar shape cut list, bar bending schedule and rebars drawing and dimension.
The [[Reinforcement Workbench|Reinforcement workbench]] is an [[External workbenches|external workbench]] that provides tools for Reinforcement Generation and Detailing. This workbench provides an interface and presets for the creation of common rebar types. And tools to generate rebars bill of material, rebar shape cut list, bar bending schedule, and rebars drawing and dimension.


</translate>
</translate>
<gallery widths=400px heights=300px>
⚫
[[Image:Arch_Rebar_BeamReinforcement_example.png|800px]]
<translate>
<!--T:31-->
Image:Arch_Rebar_Straight_example.png|[[Arch Rebar Straight|Straight Rebar]]
Image:Arch_Rebar_UShape_example.png|[[Arch Rebar UShape|UShape Rebar]]
Image:Arch_Rebar_LShape_example.png|[[Arch Rebar LShape|LShape Rebar]]
Image:Arch_Rebar_BentShape_example.png|[[Arch Rebar BentShape|BentShape Rebar]]
Image:Arch_Rebar_Stirrup_example.png|[[Arch Rebar Stirrup|Stirrup Rebar]]
Image:Arch_Rebar_Helical_example.png|[[Arch Rebar Helical|Helical Rebar]]
Image:Arch_Rebar_Circular_ColumnReinforcement_example.png|[[Arch Rebar Circular ColumnReinforcement|Circular Column Reinforcement]]
Image:Arch_Rebar_ColumnReinforcement_example.png|[[Arch Rebar ColumnReinforcement|Single Tie Column Reinforcement]]
Image:Arch_Rebar_ColumnReinforcement_TwoTies_example.png|[[Arch Rebar ColumnReinforcement TwoTiesSixRebars|Two Ties Six Rebars Column Reinforcement]]
⚫
Image:Arch_Rebar_BeamReinforcement_example.png|[[Arch Rebar BeamReinforcement|Beam Reinforcement]]
Image:Isometric_view_of_Bent_Shape_rebars_in_parallel_and_cross_direction_with_distribution_rebars.png|[[Arch_Rebar_Slab_Reinforcement|Slab Reinforcement]]
Image:Isometric_view_of_Columns_footing.png|[[Arch_Rebar_Footing_Reinforcement|Footing Reinforcement]]
Image:Arch_Rebar_BOM_example.png|[[Arch Rebar BOM|Bill Of Material]]
Image:Reinforcement_Bar_Shape_Cut_List_example.svg|[[Reinforcement_Bar_Shape_Cut_List|Rebar Shape Cut List]]
Image:Reinforcement_Bar_Bending_Schedule_example.svg|[[Reinforcement_Bar_Bending_Schedule|Reinforcement Bar Bending Schedule]]
Image:Arch_Rebar_Drawing_Dimensioning_example.svg|[[Arch Rebar Drawing Dimensioning|Reinforcement Drawing Dimensioning]]
</translate>
</gallery>
<translate>
<translate>


== Installing ==
== Installing == <!--T:4-->


<!--T:5-->
The Reinforcement workbench is not bundled with the default FreeCAD package, but can easily be installed via the [[Image:AddonManager.svg|24px]] [[Std_AddonMgr|Addon Manager]]. Install it from {{MenuCommand|Tools → Addon manager → Reinforcement}}. The Reinforcement workbench code is [https://github.com/amrit3701/FreeCAD-Reinforcement hosted and developed on github] and can also be installed manually by copying it into FreeCAD's {{FileName|MOD}} directory.
The Reinforcement workbench is not bundled with the default FreeCAD package, but can easily be installed via the [[Image:AddonManager.svg|24px]] [[Std_AddonMgr|Addon Manager]]. Install it from {{MenuCommand|Tools → Addon manager → Reinforcement}}. The Reinforcement workbench code is [https://github.com/amrit3701/FreeCAD-Reinforcement hosted and developed on github] and can also be installed manually by copying it into FreeCAD's {{FileName|MOD}} directory.


== Tools ==
== Tools == <!--T:6-->


=== Reinforcement Generation ===
=== Reinforcement Generation === <!--T:7-->


<!--T:8-->
*[[Image:Arch_Rebar_Straight.png|32px]] [[Arch_Rebar_Straight|Straight Rebar]]: Creates a Straight reinforcement bar in a selected structural element
*[[Image:Arch_Rebar_Straight.png|32px]] [[Arch_Rebar_Straight|Straight Rebar]]: Creates a Straight reinforcement bar in a selected structural element


<!--T:9-->
*[[Image:Arch_Rebar_UShape.png|32px]] [[Arch_Rebar_UShape|UShape Rebar]]: Creates a UShape reinforcement bar in a selected structural element
*[[Image:Arch_Rebar_UShape.png|32px]] [[Arch_Rebar_UShape|UShape Rebar]]: Creates a UShape reinforcement bar in a selected structural element


<!--T:10-->
*[[Image:Arch_Rebar_LShape.png|32px]] [[Arch_Rebar_LShape|LShape Rebar]]: Creates a LShape reinforcement bar in a selected structural element
*[[Image:Arch_Rebar_LShape.png|32px]] [[Arch_Rebar_LShape|LShape Rebar]]: Creates a LShape reinforcement bar in a selected structural element


<!--T:11-->
*[[Image:Arch_Rebar_BentShape.png|32px]] [[Arch_Rebar_BentShape|Bent Shape Rebar]]: Creates a Bent Shape reinforcement bar in a selected structural element
*[[Image:Arch_Rebar_BentShape.png|32px]] [[Arch_Rebar_BentShape|Bent Shape Rebar]]: Creates a Bent Shape reinforcement bar in a selected structural element


<!--T:12-->
*[[Image:Arch_Rebar_Stirrup.png|32px]] [[Arch_Rebar_Stirrup|Stirrup Rebar]]: Creates a Stirrup reinforcement bar in a selected structural element
*[[Image:Arch_Rebar_Stirrup.png|32px]] [[Arch_Rebar_Stirrup|Stirrup Rebar]]: Creates a Stirrup reinforcement bar in a selected structural element


<!--T:13-->
*[[Image:Arch_Rebar_Helical.png|32px]] [[Arch_Rebar_Helical|Helical Rebar]]: Creates a Helical reinforcement bar in a selected structural element
*[[Image:Arch_Rebar_Helical.png|32px]] [[Arch_Rebar_Helical|Helical Rebar]]: Creates a Helical reinforcement bar in a selected structural element


<!--T:29-->
⚫
*[[Image:Arch_Rebar_ColumnReinforcement.svg|32px]] [[Arch_Rebar_ColumnReinforcement|ColumnReinforcement]]: Creates a reinforcing bars inside a Column Arch Structure object.
*[[Image:Arch_Rebar_ColumnReinforcement.svg|32px]] [[Arch_Rebar_Circular_ColumnReinforcement|Circular ColumnReinforcement]]: Creates reinforcing bars in a selected circular column structural element


<!--T:14-->
⚫
*[[Image:Arch_Rebar_ColumnReinforcement.svg|32px]] [[Arch_Rebar_ColumnReinforcement_TwoTiesSixRebars|ColumnReinforcement TwoTiesSixRebars]]: Creates a reinforcing bars inside a Column Arch Structure object.
⚫
*[[Image:Arch_Rebar_ColumnReinforcement.svg|32px]] [[Arch_Rebar_ColumnReinforcement|ColumnReinforcement]]: Creates reinforcing bars in a selected rectangular column structural element


<!--T:15-->
⚫
*[[Image:Arch_Rebar_BeamReinforcement.svg|32px]] [[Arch_Rebar_BeamReinforcement|BeamReinforcement]]: Creates reinforcing bars inside a Beam Arch Structure object.
⚫
*[[Image:Arch_Rebar_ColumnReinforcement.svg|32px]] [[Arch_Rebar_ColumnReinforcement_TwoTiesSixRebars|ColumnReinforcement TwoTiesSixRebars]]: Creates reinforcing bars in a selected column structural element


<!--T:16-->
⚫
*[[Image:Arch_Rebar.svg|32px]] [[Arch_Rebar|Rebar]]: Creates a custom reinforcement bar in a selected structural element using a sketch
⚫
*[[Image:Arch_Rebar_BeamReinforcement.svg|32px]] [[Arch_Rebar_BeamReinforcement|BeamReinforcement]]: Creates reinforcing bars in a selected beam structural element


<!--T:32-->
⚫
=== Reinforcement Detailing ===
*[[Image:Arch_Rebar_Slab_Reinforcement.svg|32px]] [[Arch_Rebar_Slab_Reinforcement|SlabReinforcement]]: Creates reinforcing bars in a selected slab structural element


<!--T:33-->
⚫
*[[Image:Arch_Rebar_BOM.svg|32px]] [[Arch_Rebar_BOM| BillOfMaterial]]: Creates bill of material of reinforcing bars.
*[[Image:Arch_Rebar_Footing_Reinforcement.svg|32px]] [[Arch_Rebar_Footing_Reinforcement|FootingReinforcement]]: Creates reinforcing bars inside a Footing Arch Structure object


<!--T:17-->
⚫
*[[Image:Arch_Rebar_Drawing.svg|32px]] [[Arch_Rebar_Drawing| Reinforcement Drawing]]: Creates drawing of reinforcing bars.
⚫
*[[Image:Arch_Rebar.svg|32px]] [[Arch_Rebar|Rebar]]: Creates a custom reinforcement bar in a selected structural element using a sketch

⚫
*[[Image:Arch_Rebar_Dimensioning.svg|32px]] [[Arch_Rebar_Dimensioning| Reinforcement Dimensioning]]: Creates dimensioning of reinforcing bars in [[Arch Rebar Drawing|Reinforcement Drawing]].

⚫
*[[Image:Arch_Rebar_Drawing_Dimensioning.svg|32px]] [[Arch_Rebar_Drawing_Dimensioning| Reinforcement Drawing Dimensioning]]: Creates drawing and dimensioning of reinforcing bars.


⚫
=== Reinforcement Detailing === <!--T:18-->


<!--T:19-->
== External workbenches ==
⚫
*[[Image:Arch_Rebar_BOM.svg|32px]] [[Arch_Rebar_BOM|Bill Of Material]]: Creates bill of material of reinforcing bars


<!--T:20-->
FreeCAD workbenches are easy to program in [[Python|Python]], there are therefore many people developing additional workbenches outside of the FreeCAD main developers.
*[[Image:Reinforcement_Bar_Shape_Cut_List.svg|32px]] [[Reinforcement_Bar_Shape_Cut_List|Rebar Shape Cut List]]: Creates rebar shape cut list of reinforcing bars


<!--T:21-->
The [[external workbenches|external workbenches]] page has some information and tutorials on some of them, and the [https://github.com/FreeCAD/FreeCAD-addons FreeCAD Addons] project aims at gathering them and making them easily installable from within FreeCAD.
*[[Image:Reinforcement_Bar_Bending_Schedule.svg|32px]] [[Reinforcement_Bar_Bending_Schedule|Reinforcement Bar Bending Schedule]]: Creates bar bending schedule of reinforcing bars


<!--T:24-->
New workbenches are in development, stay tuned!
⚫
*[[Image:Arch_Rebar_Drawing_Dimensioning.svg|32px]] [[Arch_Rebar_Drawing_Dimensioning|Reinforcement Drawing Dimensioning]]: Creates drawing and dimensioning of reinforcing bars
⚫
**[[Image:Arch_Rebar_Drawing.svg|32px]] [[Arch_Rebar_Drawing_Dimensioning#Reinforcement_Drawing|Reinforcement Drawing]]: Creates drawing of reinforcing bars
⚫
**[[Image:Arch_Rebar_Dimensioning.svg|32px]] [[Arch_Rebar_Drawing_Dimensioning#Reinforcement_Dimensioning|Reinforcement Dimensioning]]: Creates dimensioning of reinforcing bars in [[Arch_Rebar_Drawing_Dimensioning#Reinforcement_Drawing|Reinforcement Drawing]]


</translate>
</translate>

Revision as of 14:53, 24 September 2021

Other languages:
Reinforcement workbench icon

Introduction

The Reinforcement workbench is an external workbench that provides tools for Reinforcement Generation and Detailing. This workbench provides an interface and presets for the creation of common rebar types. And tools to generate rebars bill of material, rebar shape cut list, bar bending schedule, and rebars drawing and dimension.

Installing

The Reinforcement workbench is not bundled with the default FreeCAD package, but can easily be installed via the Addon Manager. Install it from Tools → Addon manager → Reinforcement. The Reinforcement workbench code is hosted and developed on github and can also be installed manually by copying it into FreeCAD's MOD directory.

Tools

Reinforcement Generation

  • Straight Rebar: Creates a Straight reinforcement bar in a selected structural element
  • UShape Rebar: Creates a UShape reinforcement bar in a selected structural element
  • LShape Rebar: Creates a LShape reinforcement bar in a selected structural element
  • Bent Shape Rebar: Creates a Bent Shape reinforcement bar in a selected structural element
  • Stirrup Rebar: Creates a Stirrup reinforcement bar in a selected structural element
  • Helical Rebar: Creates a Helical reinforcement bar in a selected structural element
  • ColumnReinforcement: Creates reinforcing bars in a selected rectangular column structural element
  • Rebar: Creates a custom reinforcement bar in a selected structural element using a sketch

Reinforcement Detailing

User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Reinforcement_Workbench&oldid=1045178"