From FreeCAD Documentation
Revision as of 18:50, 5 December 2013 by Jriegel (talk | contribs)
Jump to navigation Jump to search

The Quantity is a combination of a floating point number and an Unit. It is used throughout all of FreeCAD to handle parameters and all other kind of input/output.


In a CAD or CAE system its very important to keep track on the unit of an value. Lot of trouble can arise when mixing up units or calculating results in different unit systems. One famous disaster is the crash of the Mars Climate Orbiter through out a unit mix-up. Even in the same unit-system the units come in lots of different flavors always tailored to the field of use. Simple examples are e.g. velocity in km/h (cars), m/s (robotics) or mm/minute (milling). A CAD system have to keep reliably track of units. Also it has to calculate with them and check on the right unit for special parameters.

For that reason the FreeCAD Quantity framework was created. It includes all the code and objects to deal with units, unit calculations, user input, conversion in other unit systems and the pretty output of units and values. In the long run no parameter in FreeCAD should be just a number.

All physical units can be expressed as a combination of the seven SI-Units:


An easy way to express a Unit is a integer array of size 7 (number of base units) that defines what the unit is. The signature of the 7 base units are:

  • LENGTH: [1,0,0,0,0,0,0]
  • MASS: [0,1,0,0,0,0,0]
  • TIME: [0,0,1,0,0,0,0]
  • ELECTRIC CURRENT: [0,0,0,1,0,0,0]
  • AMOUNT OF SUBSTANCE: [0,0,0,0,0,1,0]
  • LUMINOUS INTENSITY: [0,0,0,0,0,0,1]

From these 7 units, we are then able to express all derived units defined in Guide for the Use of the International System of Units (SI) and create new ones as needed such as for instance:

  • MASS DENSITY: [-3,1,0,0,0,0,0]
  • AREA: [0,2,0,0,0,0,0]

Since angle is physically dimensionless, but never the less important to a CAD system we add one more virtual unit for Angle. This makes a vector of 8 in the FreeCAD unit signature.

Units calculator

Often you are in need of calculating units from one system to another. For example you have old parameter tables with wired units. In that cases FreeCAD offers a conversion tool called Units-Calculator which helps in translating units.

Its description in detail is here: Std_UnitsCalculator

Python scripting

import FreeCAD


Parser supported Units

Although all physical units can be described with the seven SI units, most of the units used in technical areas are common combined units (like Pa = N/m^2 Pascal ). There fore the units parser in FreeCAD support lot of SI and Imperial combined units. This units are defined in src/Base/QuantityParser.l file and can be further advanced in the future.

"nm"   = Quantity(1.0e-6    ,Unit(1));           // nano meter
"ym"   = Quantity(1.0e-3    ,Unit(1));           // micro meter
"mm"   = Quantity(1.0       ,Unit(1));           // milli meter
"cm"   = Quantity(10.0      ,Unit(1));           // centi meter
"dm"   = Quantity(100.0     ,Unit(1));           // deci meter
"m"    = Quantity(1.0e3     ,Unit(1));           // meter
"km"   = Quantity(1.0e6     ,Unit(1));           // kilo meter
"l"    = Quantity(1000000.0 ,Unit(3));           // Liter      dm^3
"yg"   = Quantity(1.0e-9    ,Unit(0,1));         // milli gram
"mg"   = Quantity(1.0e-6    ,Unit(0,1));         // milli gram
"g"    = Quantity(1.0e-3    ,Unit(0,1));         // gram
"kg"   = Quantity(1.0       ,Unit(0,1));         // kilo gram
"t"    = Quantity(1000.0    ,Unit(0,1));         // ton
"s"    = Quantity(1.0       ,Unit(0,0,1));       // second                          (internal standard time)
"min"  = Quantity(60.0      ,Unit(0,0,1));       // minute
"h"    = Quantity(3600.0    ,Unit(0,0,1));       // hour  
"A"    = Quantity(1.0       ,Unit(0,0,0,1));     // Ampere          (internal standard electric current)
"mA"   = Quantity(0.001     ,Unit(0,0,0,1));     // milli Ampere         
"kA"   = Quantity(1000.0    ,Unit(0,0,0,1));     // kilo Ampere         
"MA"   = Quantity(1.0e6     ,Unit(0,0,0,1));     // Mega Ampere         
"K"    = Quantity(1.0       ,Unit(0,0,0,0,1));   // Kelvin (internal standard thermodynamic temperature)
"mK"   = Quantity(0.001     ,Unit(0,0,0,0,1));   // Kelvin         
"yK"   = Quantity(0.000001  ,Unit(0,0,0,0,1));   // Kelvin         
"mol"  = Quantity(1.0       ,Unit(0,0,0,0,0,1));   // Mole     (internal standard amount of substance)        
"cd"   = Quantity(1.0       ,Unit(0,0,0,0,0,0,1)); // Candela   (internal standard luminous intensity)        
"deg"  = Quantity(1.0           ,Unit(0,0,0,0,0,0,0,1));  // degree         (internal standard angle)
"rad"  = Quantity(180/M_PI      ,Unit(0,0,0,0,0,0,0,1));  // radian         
"gon"  = Quantity(360.0/400.0   ,Unit(0,0,0,0,0,0,0,1));  // gon         
"in"   = Quantity(25.4          ,Unit(1));       // inch
"\""   = Quantity(25.4          ,Unit(1));       // inch
"fo"   = Quantity(304.8         ,Unit(1));       // foot
"'"    = Quantity(304.8         ,Unit(1));       // foot
"th"   = Quantity(0.0254        ,Unit(1));       // thou
"yr"   = Quantity(914.4         ,Unit(1));       // yard

"lb"   = Quantity(0.45359237    ,Unit(0,1));    // pound
"oz"   = Quantity(0.0283495231  ,Unit(0,1));    // ounce
"st"   = Quantity(6.35029318    ,Unit(0,1));    // Stone
"cwt"  = Quantity(50.80234544   ,Unit(0,1));    // hundredweights
Available translations of this page: Flag-fr.jpg Flag-it.jpg