FreeCAD 的首选项位于菜单栏中的 编辑 → 首选项。
FreeCAD 的功能被分为了不同的模块，每个模块负责某个具体工作台的相关工作。FreeCAD 还使用了一种称之为后加载的观念，意即相关组件只有在需要时才被加载进来。或许你已经注意到，当你在 FreeCAD 工具栏中选择一个工作台时，此工作台和它的所有组件都同时被加载进来。这其中包含了它的首选项设置。
在刚启动 FreeCAD 时没有加载工作台，此时出现的是最小首选项窗口。随着其它模块的载入，最小首选项窗口中就会出现新的部分，此时可以对每个工作台的细节进行配置。
This option only has an effect if in Style sheet/No style sheet is selected.
The image can be changed by adding the folders Gui/Images in the folder
%APPDATA%/FreeCAD (on Windows),
$HOME/.FreeCAD (on Linux) or
$HOME/Library/Preferences/FreeCAD (on MacOS).
Put there a file named background.png and uncheck/check this option to see the changed file. |- | Style sheet | Selection of a style sheet. The style sheets define how the user interface of FreeCAD looks. |- | Size of toolbar icons | Selection of the size for the toolbar icons |- | Tree view mode | Customization how the tree view is shown in the panel (restart required). The options are:
- Combo View: combine tree view and property view into one panel.
- TreeView and PropertyView: split tree view and property view into separate panel.
- Both: keep all three panels, and you can have two sets of tree view and property view.
|- | Auto load module after start up | Selection what workbench will be used directly after starting FreeCAD |- | Enable splash screen at start up | If checked, the splash screen of FreeCAD is shown when starting.
The splash screen image can be changed by adding the folders Gui/Images in the folder %APPDATA%/FreeCAD (where %APPDATA% is the the user-specific application folder of FreeCAD of your operating system). Put there a file named splash_image.png and restart FreeCAD to see the changed splash screen. |- | Enable word wrap | Words will be wrapped when they exceed the available horizontal space in the Python console. This console is shown using the menu View → Panels → Python console. |}
In the Document tab you can specify the following:
|Create new document at start up||If checked, FreeCAD will create a new document when started|
|Document save compression level||Specification of the compression level for FCStd files. FCStd files are ZIP-compressed files. Therefore you can rename their suffix .FCStd to .zip and open them with a ZIP archive program.|
|Using Undo/Redo on documents||If checked, all changes in documents are stored so that they can be undone/redone|
|Maximum Undo/Redo steps||Specification how many Undo/Redo steps should be recorded|
|Allow aborting recomputation||Allow to aborting the document recomputation by pressing. This may slightly increase the recomputation time.|
|Run AutoRecovery at startup||If there is a recovery file available FreeCAD will automatically run a file recovery when it is started. This way files can be restored if a crash occurred.|
|Save AutoRecovery information every||Specification how often a recovery file is written.|
|Save thumbnail into project file when saving document||If checked, also a thumbnail will be stored when the document is saved. The thumbnail will for example be shown in the list of recent files in the Start workbench. It is possible to select a Size between 128×128 and 512×512 pixels for the thumbnail. Common sizes are the powers of two: 128, 256, 512.|
|Add the program logo to the generated thumbnail||If checked, the FreeCAD program logo will be added to the thumbnail. This option only has an effect if Save thumbnail into project file when saving document is used.|
|Maximum number of backup files to keep when resaving document||If checked, backup files will be kept when saving the document. You can specify how many backup files will be kept. They contain the previously saved document version. The first backup file will have the file suffix .FCStd1, the second .FCStd2 and so on.|
|Use date and FCBak extension||If checked, backup files will get the extension .FCbak and their file names get a date suffix according to the specified date format. For a description of the date format see this site.
With the default settings the backup file will get for example this name TD-Cube.20200315-215654.FCBak (original filename is TD-Cube.FCStd).
|Allow duplicate object labels in one document||If checked, objects can have the same label/name. For example different parts or features can then have the same name in the same document.|
|Disable partial loading of external linked objects||Enable partial loading of external linked document. When enabled, only the referenced objects and their dependencies will be loaded when a linked document is auto opened together with the main document. A partially loaded document cannot be edited. Double click the document icon in the tree view to reload it in full. A more detailed explanation of the feature can be found on the Assembly3 documentation page|
|Author name||All documents that will be created will get the specified author name. Keep the author field blank for an anonymous author. If the option Set on save is checked, the field Last modified by will be set to the specified author when saving the file. This field can be viewed using the menu File → Project information.|
|Company||All documents that will be created will get the specified company name|
|Default license||Selection of a default license for new documents. For predefined license the License URL will automatically be set accordingly. Select 'Other' for an own or special license.|
|License URL||Specification of an URL describing the license selected in Default license|
The editor preferences settings affect the behavior of the macro editor. This editor can be opened using the menu Macro → Macros... → Edit/Create.
The color and font settings also affect the Python console. This console is shown using the menu View → Panels → Python console.
In the Editor tab you can specify the following:
|Display Items||Selection of the code type. The color and font settings will be applied to the selected type. The result can be seen in the Preview field.|
|Family||Specification of the font family that should be used for the selected code type|
|Size||Specification of the font size that should be used for the selected code type|
|Color||Specification of the color that should be used for the selected code type|
|Enable line numbers||If checked, the code lines will be numbered|
|Tab size||Specification of the tabulator raster (how many spaces). If it is for example set to '6', pressingwill jump to character 7 or 13 or 19 etc., depending the current cursor position. This setting is only used if Keep tabs is selected.|
|Indent size||Specification of how many spaces will be inserted when pressing. This setting is only used if Insert spaces is selected.|
|Keep tabs||If selected, pressingwill insert a tabulator with the raster defined by Tab size|
|Insert spaces||If selected, pressingwill insert the amount of spaces defined by Indent size|
The output preferences affect the behavior of the Report view.
In the Output tab you can specify the following:
|Record log messages||If checked, also log messages will be recorded. They will be output in the Report view panel with the color set in Log messages. This panel is shown using the menu View → Panels → Report view.|
|Record warnings||If checked, warnings will be recorded. They will be output in the Report view panel with the color set in Warnings.|
|Record error messages||If checked, error messages will be recorded. They will be output in the Report view panel with the color set in Errors|
|Show report view on error or warning||If checked, the report view panel will show up automatically when an error or warning is logged.|
|Normal messages||Specification of the font color for normal messages in the Report view panel.|
|Log messages||Specification of the font color for log messages in the Report view panel.|
|Warnings||Specification of the font color for warning messages in the Report view panel.|
|Errors||Specification of the font color for error messages in the Report view panel.|
|Redirect internal Python output to report view||If checked, internal Python output will be redirected from the Python console to the Report view panel. The Python console is shown using the menu View → Panels → Python console|
|Redirect internal Python errors to report view||If checked, internal Python error messages will be redirected from the Python console to the Report view panel.|
In the Macro tab you can specify the following:
|Run macros in local environment||If checked, variables defined by macros are created as local variables, otherwise as global Python variable|
|Macro path||Specification of a path to macro files|
|Recording GUI commands||If checked, recorded macros will also contain user interface commands|
|Record as comment||If checked, recorded macros will also contain user interface commands but as comments. This is useful if you don't want to execute visible actions when running the macro but to see what could be done visibly.|
|Show script commands in python console||If checked, the commands executed by the macro scripts are shown in the Python console. This console is shown using the menu View → Panels → Python console.|
|Size of recent macros list||Controls the number of recent macros to display in the menu.|
|Shortcut count||Controls the number of recent macros that get dynamically assigned shortcuts.|
|Keyboard modifiers||Controls which keyboard modifiers are used for the shortcuts, example Ctrl+Shift+ creates shortcuts in the form of Ctrl+Shift+1, Ctrl+Shift+2, etc.|
This tab configures how Units are shown.
This tab is always available, and controls certain characteristics of the 3D view.
In the 3D View tab you can specify the following:
|Show coordinate system in the corner||If checked, the main coordinate system will always be shown at the lower right in opened files|
|Show axis cross by default introduced in version 0.19||If checked, the axis cross will be shown by default at file opening or creation|
|Show counter of frames per second||If checked, the time needed for the last operation and the resulting frame rate will always be shown at the lower left in opened files|
|Remember active workbench by tab introduced in version 0.19||If checked, the application will remember what is the active workbench for each tab independently. This way, the active workbench will be automatically restored when changing tab in the multiple-document interface (MDI) view.|
|Use OpenGL Vertex Buffer Object||If checked, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. VBOs offer substantial performance gains because the data resides in the graphics memory rather than the system memory and so it can be rendered directly by GPU. For more background info see this webpage.|
|Render Cache introduced in version 0.19||"Render Cache" or "Render Acceleration" is explained in more detail in Link#render-caching. There are 3 options:
|Anti-Aliasing||Selection if and what kind of multisample anti-aliasing is used|
|Transparent objects introduced in version 0.19||Render type of transparent objects. The types are:
|Marker size||Selection of the size of vertices (points) in the Sketcher workbench. The clickable area of points can be additionally enlarged by increasing Pick radius (on Colors tab).|
|Eye to eye distance for stereo modes||Specification of the eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed.|
|Backlight color||If checked, backlight is enabled with the defined color. Backlight is used for rendering back sides of faces (usually, you don't see them in solids, unless you slice one with a clipping plane, or if the faces aren't oriented correctly). It is only active for objects whose Lighting property (on View tab) is set to "One side". If disabled, back sides of faces of objects in "One side" lighting mode will be black.
The related Intensity setting specifies the intensity of the backlight.
|Camera type||Selection of the camera projection type.|
This tab is always available, and controls the behavior of the navigation tools.
In the Navigation tab you can specify the following:
|Navigation cube||If checked, the navigation cube will always be shown. Related Steps by turn defines how many steps (notches) will be applied when using the Navigation cube rotation arrows. Related Corner defines where the Navigation cube is displayed on the screen when creating/opening a document|
|3D Navigation||Selection of a navigation settings set. To see what each set defines, select a set and press the button .|
|Orbit style||Selection of the rotation orbit style. When viewing a part in the x-y plane an being in the rotation mode of the 3D navigation, the difference is: If Trackball is selected, moving the mouse horizontally will rotate the part around the y-axis, if Turntable is selected the part will be rotated around the z-axis.|
|New Document Camera Orientation||Selection of the camera orientation for new documents|
|New Document Scale||Affects the initial "zoom level" of camera for new documents. The value you set is the diameter of a sphere that fits in 3D view. Default is 100 mm, convenient for objects like boxes for Arduino. It also sets initial size of origin features (base planes in a new PartDesign Body).|
|Enable animation||If checked, rotations can be animated. If for example the 3D Navigation set CAD is used and the mouse is moved while the scroll wheel and the right mouse button is pressed, parts are rotated. If one keeps the mouse moving while releasing e.g. the right mouse button, the rotation will continue as animation. To end the animation left-click with the mouse.|
|Zoom at cursor||If checked, zoom operations will be performed at the position of the mouse pointer. Otherwise zoom operations will be performed at the center of the current view. The Zoom step defines how much will be zoomed. A zoom step of '1' means a factor of 7.5 for every zoom step.|
|Invert zoom||If checked, the direction of zoom operations will be inverted.|
|Disable touchscreen tilt gesture||If checked, the tilting gesture will be disabled for pinch-zooming (two-finger zooming). This only affects the 3D Navigation set Gesture.|
|Rotate at cursor||If checked, rotations in 3D will use the current cursor position as center for the rotation. Otherwise always the center of the screen will be used.|
This tab is always available.
In the Colors tab you can specify the following:
|Enable preselection highlighting||If checked, preselection is turned on and will be highlighted by the specified color. Preselection means that for example edges in parts will be highlighted while hovering with the mouse over them to indicate that they can be selected.|
|Enable selection highlighting||If checked, selection highlighting is turned on and the specified color will be used for it|
|Pick radius||Sets the area for picking elements in 3D view. Larger value makes it easier to pick things, but can make some small features impossible to select.|
|Simple color||If selected, the background for parts will have the selected color|
|Color gradient||If selected, the background for parts will have a vertical color gradient. The first color is the color at the top of the background, the second one the color at the bottom.|
|Middle color||Is only enabled if Color gradient is selected. If checked, the color gradient will get the selected color as middle color.|
|Object being edited||Selection of the background color for objects in the tree view that are currently edited|
|Active container||Selection of the background color for active containers in the tree view. For example if there are several parts in the tree view and one part is toggled as active body, it will get the selected background color in the tree view.|
In the Part colors tab you can specify the following:
|Shape color||Color for new shapes. If the option Random is set, a random color is used instead.|
|Line color||Line color for new shapes|
|Line width||Line thickness for new shapes|
|Vertex color||Color for new vertices|
|Vertex size||Size for new vertices|
|Bounding box color||Color of bounding boxes in the 3D view|
|Two-side rendering||If checked, the bottom side of the surface will be rendered the same way than the top side. If not checked, it depends on the option Backlight color; either the backlight color will be used or black.|
|Text color||Text color for document annotations. There is currently no dialog to add annotations to documents. Annotations can only be added using the Python console with this command:
This console is shown using the menu View → Panels → Python console.
This tab is only shown if you are in the Mesh Workbench or if you have been in this workbench before.
In the Mesh view tab you can specify the following:
|Default mesh color||Selection of the default color for new meshes|
|Default line color||Selection of the default line color for new meshes|
|Mesh transparency||Specification of the default mesh transparency for new meshes|
|Line transparency||Specification of the default line transparency for new meshes|
|Two-side rendering||If checked, the bottom side of the surface will be rendered the same way than the top side. If not checked, it depends on the option Enable backlight color (see section 3D view). Either the backlight color will be used or black.|
|Show bounding-box for highlighted or selected meshes||If checked, a yellow bounding box will be displayed for highlighted or selected meshes.|
|Define normal per vertex||If checked, Phong shading is used, otherwise flat shading. Shading defines the appearance of surfaces.
With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance.
|Crease angle||The crease angle is a threshold angle between two faces. It can only be set if the option Define normal per vertex is used.
The Import-Export settings affect how files are imported and exported to and from FreeCAD. They are described in the page Import Export Preferences.
下面链接了更常见工作台的首选项。 有些工作台没有偏好。 其他可选工作台可能未列出。
Preferences for the more common workbenches are linked below. Some workbenches have no preferences. Other optional workbenches may not be listed. These links are also listed in Category:Preferences
- A2plus Preferences
- Ship Preferences (none)