To start the Preferences editor select the Edit → Preferences... option from the menu. On the Mac OS the Preferences... option appears in the FreeCAD menu instead (this is the default place for preferences on the Mac).
FreeCAD uses a workbench concept, where each workbench is responsible for specific tasks and functions. A workbench can have its own preferences. These will only appear in the Preferences editor if the workbench has been loaded in the current FreeCAD session. See Workbenches below for more information.
If no workbench is loaded, four sections appear in the Preferences editor: General, Display, Workbenches, and Import-Export. Any workbenches that have been loaded, and have their own preferences, will appear below these.
Please note that pressing thebutton in the lower left corner of the Preferences dialog will reset all FreeCAD preferences to their default values.
This preferences section has 7 tabs: General, Document, Selection, Editor, Output window, Macro, and Units.
On the General tab you can specify the following:
|Change language||Selection of the language of the FreeCAD user interface|
|Size of recent file list||Specification how many files should be listed in the recent files list|
|Enable tiled background||If checked, the background of FreeCAD's main window will by default consist of tiles of this image:
This option only has an effect if no Style sheet is selected.
The image can be changed by adding the folders Gui/Images in the folder:
%APPDATA%/FreeCAD (on Windows),
$HOME/.FreeCAD (on Linux) or
$HOME/Library/Preferences/FreeCAD (on MacOS).
Place a file named background.png in the Images folder, and uncheck/check this option to see the changed file.
|Style sheet||Selection of a style sheet. Style sheets define how the user interface of FreeCAD looks. For technical details about the style sheets, see themes.|
|Size of toolbar icons||Selection of the size for the toolbar icons|
|Tree view mode||Customization how the tree view is shown in the panel (restart required). The options are:
|Auto load module after start up||Selection what workbench will be used directly after starting FreeCAD|
|Enable splash screen at start up||If checked, a splash screen is shown when starting FreeCAD.
The splash screen image can be changed by placing a file named splash_image.png in the Images folder already mentioned under Enable tiled background.
|Enable word wrap||Words will be wrapped when they exceed the available horizontal space in the Python console. This console is shown using the menu View → Panels → Python console.|
On the Document tab you can specify the following:
|Create new document at start up||If checked, FreeCAD will create a new document when started|
|Document save compression level||Specification of the compression level for FCStd files. FCStd files are ZIP-compressed files. Therefore you can rename their suffix .FCStd to .zip and open them with a ZIP archive program.|
|Using Undo/Redo on documents||If checked, all changes in documents are stored so that they can be undone/redone|
|Maximum Undo/Redo steps||Specification how many Undo/Redo steps should be recorded|
|Allow aborting recomputation||If checked, recomputations can be aborted by pressing. This may slightly increase the recomputation time.|
|Run AutoRecovery at startup||If there is a recovery file available FreeCAD will automatically run a file recovery when it is started. This way files can be restored if a crash occurred.|
|Save AutoRecovery information every||Specification how often a recovery file is written.|
|Save thumbnail into project file when saving document||If checked, a thumbnail will be stored when the document is saved. The thumbnail will for example be shown in the list of recent files in the Start workbench. It is possible to select a Size between 128×128 and 512×512 pixels for the thumbnail. Common sizes are the powers of two: 128, 256, 512.|
|Add the program logo to the generated thumbnail||If checked, the FreeCAD program logo will be added to the thumbnail.|
|Maximum number of backup files to keep when resaving document||If checked, backup files will be kept when saving the document. You can specify the number of backup files to keep. Backup files are previously saved versions of the document. The first backup file will have the file suffix .FCStd1, the second .FCStd2 and so on.|
|Use date and FCBak extension||If checked, backup files will get the extension .FCbak and their file names get a date suffix according to the specified date format. For a description of the date format see this site.
With the default settings a backup file will for example get this name TD-Cube.20200315-215654.FCBak (original filename is TD-Cube.FCStd).
|Allow duplicate object labels in one document||If checked, objects can have the same label.|
|Disable partial loading of external linked objects||If partial loading of external linked objects is enabled, only the referenced objects and their dependencies will be loaded when the linked document is auto opened together with the main document. Such a partially loaded document cannot be edited. Double click the document icon in the tree view to reload it in full. A more detailed explanation of this feature can be found on the Assembly3 documentation page|
|Author name||All created documents will get the specified author name. Keep the author field blank if you do not want to include this information. If the option Set on save is checked, the field Last modified by will be set to the specified author when saving the file. This field can be viewed using the File → Project information menu option.|
|Company||All created documents will get the specified company name|
|Default license||Selection of the license for new documents. For predefined licenses the License URL will automatically be set accordingly. Select Other for a custom license.|
|License URL||Specification of an URL describing the license selected in Default license|
On the Selection tab (introduced in version 0.19) you can specify the following:
|Auto switch to the 3D view containing the selected item||Enables the Tree view SyncView mode|
|Auto expand tree item when the corresponding object is selected in 3D view||Enables the Tree view SyncSelection mode|
|Preselect the object in 3D view when mouse over the tree item||Enables the Tree view PreSelection mode|
|Record selection in tree view in order to go back/forward using navigation button||Enables the Tree view RecordSelection mode|
|Add checkboxes for selection in document tree||Each document tree item will get a checkbox. This is for example useful for selecting multiple items on a touchscreen.|
The editor preferences settings affect the behavior of the macro editor. This editor can be opened using the menu Macro → Macros... → Edit/Create.
The color and font settings also affect the Python console. This console is shown using the menu View → Panels → Python console.
On the Editor tab you can specify the following:
|Enable line numbers||If checked, the code lines will be numbered|
|Tab size||Specification of the tabulator raster (how many spaces). If it is for example set to 6, pressingwill jump to character 7 or 13 or 19 etc., depending on the current cursor position. This setting is only used if Keep tabs is selected.|
|Indent size||Specification of how many spaces will be inserted when pressing. This setting is only used if Insert spaces is selected.|
|Keep tabs||If selected, pressingwill insert a tabulator with the raster defined by Tab size|
|Insert spaces||If selected, pressingwill insert the amount of spaces defined by Indent size|
|Display Items||Selection of the code type. The color and font settings will be applied to the selected type. The result can be checked in the Preview field.|
|Family||Specification of the font family that should be used for the selected code type|
|Size||Specification of the font size that should be used for the selected code type|
|Color||Specification of the color that should be used for the selected code type|
The output preferences affect the behavior of the Report view. This panel is shown using the menu View → Panels → Report view.
On the Output tab you can specify the following:
|Record normal messages||If checked, normal messages will be recorded. They will be displayed in the Report view with the color set in Normal messages.|
|Record log messages||If checked, log messages will be recorded. They will be displayed in the Report view with the color set in Log messages.|
|Record warnings||If checked, warnings will be recorded. They will be displayed in the Report view with the color set in Warnings.|
|Record error messages||If checked, error messages will be recorded. They will be displayed in the Report view with the color set in Errors.|
|Show report view on error||If checked, the Report view will be shown automatically when an error is recorded|
|Show report view on warning||If checked, the Report view will be shown automatically when a warning is recorded|
|Show report view on normal message||If checked, the Report view will be shown automatically when a normal message is recorded|
|Show report view on log message||If checked, the Report view will be shown automatically when a log message is recorded|
|Include a timecode for each entry||If checked, each message and warning will receive a timecode|
|Normal messages||Specification of the font color for normal messages|
|Log messages||Specification of the font color for log messages|
|Warnings||Specification of the font color for warning messages|
|Errors||Specification of the font color for error messages|
|Redirect internal Python output to report view||If checked, internal Python output will be redirected from the Python console to the Report view|
|Redirect internal Python errors to report view||If checked, internal Python error messages will be redirected from the Python console to the Report view|
On the Macro tab you can specify the following:
|Run macros in local environment||If checked, variables defined by macros are created as local variables, otherwise as global Python variables|
|Macro path||Specification of the path for macro files|
|Record GUI commands||If checked, recorded macros will also contain user interface commands|
|Record as comment||If checked, recorded macros will also contain user interface commands, but as comments. This is useful if you don't want to execute these commands when running the macro, but do want to see what has been done while recording.|
|Show script commands in python console||If checked, the commands executed by macro scripts are shown in the Python console. This console is shown using the View → Panels → Python console menu option.|
|Size of recent macros list||Controls the number of recent macros to display in the menu|
|Shortcut count||Controls the number of recent macros that get dynamically assigned shortcuts|
|Keyboard Modifiers||Controls which keyboard modifiers are used for the shortcuts, example Ctrl+Shift+ creates shortcuts in the form of Ctrl+Shift+1, Ctrl+Shift+2, etc.|
On the Units tab you can specify the following:
|Unit system||Selection of the unit system to be used for all parts of FreeCAD|
|Number of decimals||The number of decimals that should be shown for numbers and dimensions|
|Minimum fractional inch||Minimum fractional inch that should be displayed. This setting is only available if the unit system Building US (ft-in/sqft/cuft) is used.|
This preferences section has three standard tabs: 3D View, Navigation and Colors. A fourth tab, Mesh view, is added if the Mesh Workbench has been loaded.
On the 3D View tab you can specify the following:
|Show coordinate system in the corner||If checked, the main coordinate system will always be shown at the lower right in opened files.
The Relative size introduced in version 0.20 defines the size of the representation as a percentage of the viewport size (the minimum of its height and width).
|Show axis cross by default introduced in version 0.19||If checked, the axis cross will be shown by default at file opening or creation|
|Show counter of frames per second||If checked, the time needed for the last operation and the resulting frame rate will always be shown at the lower left in opened files|
|Remember active workbench by tab introduced in version 0.19||If checked, the application will remember the active workbench for each tab in the Main view area independently. When switching to a tab this workbench will be restored automatically.|
|Use software OpenGL introduced in version 0.19||If checked, OpenGL will use the CPU instead of the GPU. This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application.|
|Use OpenGL VBO (Vertex Buffer Object)||If checked, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. VBOs offer substantial performance gains because the data resides in the graphics memory rather than the system memory and so it can be rendered directly by the GPU. For more background info see this webpage.|
|Render Cache introduced in version 0.19||"Render Cache" or "Render Acceleration" is explained in more detail in FreeCAD_assembly3 render-caching. There are 3 options:
|Anti-Aliasing||Selection if and what kind of multisample anti-aliasing is used|
|Transparent objects introduced in version 0.19||Render type of transparent objects. The types are:
|Marker size||Selection of the size of vertices (points) in the Sketcher workbench. The clickable area of points can be additionally enlarged by increasing the Pick radius.|
|Pick radius (px)||Sets the area for picking elements in the 3D view. Larger value makes it easier to pick things, but can make some small features impossible to select.|
|Eye to eye distance for stereo modes||Specification of the eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed.|
|Backlight color||If checked, backlight is enabled with the defined color. Backlight is used for rendering back sides of faces. Usually, you don't see them in solids, unless you slice one with a clipping plane, or if the faces aren't oriented correctly. It is only active for objects whose Lighting property (on the View tab) is set to One side. If disabled, back sides of faces of objects in One side lighting mode will be black.
The related Intensity setting specifies the intensity of the backlight.
|Camera type||Selection of the camera projection type.|
On the Navigation tab you can specify the following:
|Navigation cube||If checked, the Navigation cube will always be shown.
Steps by turn defines the number of steps required for a full rotation when using the Navigation cube rotation arrows.
Corner defines where the Navigation cube is displayed on the screen when creating or opening a document.
If Rotate to nearest is checked, the 3D view is rotated to the nearest most logical state when a cube face is clicked. When it is off, clicking to a cube face will and up always to the same position, no matter in what cube state you were when you clicked the face. introduced in version 0.20
Cube size defines the size of the cube. introduced in version 0.20
|3D Navigation||Selection of a navigation settings set. To see what each set defines, select it and then press the button.|
|Orbit style||Selection of the rotation orbit style. When viewing a part in the x-y plane and being in the rotation mode of the 3D navigation, the difference is: If Trackball is selected, moving the mouse horizontally will rotate the part around the y-axis, if Turntable is selected the part will be rotated around the z-axis.|
|Rotation mode||Defines the rotation center. Select Window center, Drag at cursor, or Object center.|
|Default camera orientation||Selection of the camera orientation for new documents. This setting is also used by the Std ViewHome command.|
|New document scale||Affects the initial camera zoom level for new documents. The value you set is the diameter of a sphere that fits in 3D view. Default is 100 mm. It also sets the initial size of origin features (base planes in new PartDesign Bodies).|
|Enable animation||If checked, rotations can be animated. If for example the 3D Navigation set CAD is used and the mouse is moved while the scroll wheel and the right mouse button are pressed, parts are rotated. If one keeps the mouse moving while releasing e.g. the right mouse button, the rotation will continue as animation. To end the animation left-click with the mouse.|
|Zoom at cursor||If checked, zoom operations will be performed at the position of the mouse pointer. Otherwise zoom operations will be performed at the center of the current view. The Zoom step defines how much will be zoomed. A zoom step of 1 means a factor of 7.5 for every zoom step.|
|Invert zoom||If checked, the direction of zoom operations will be inverted|
|Disable touchscreen tilt gesture||If checked, the tilting gesture will be disabled for pinch-zooming (two-finger zooming). This only affects the 3D Navigation set Gesture.|
On the Colors tab you can specify the following:
|Enable preselection highlighting||If checked, preselection is turned on and the specified color will be used for it. Preselection means that for example edges in parts will be highlighted while hovering over them with the mouse to indicate they can be selected.|
|Enable selection highlighting||If checked, selection highlighting is turned on and the specified color will be used for it|
|Simple color||If selected, the background of the 3D view will have the selected color|
|Color gradient||If selected, the background of the 3D view will have a vertical color gradient. The first color is the color at the top of the 3D view, the second the color at the bottom.|
|Middle color||Is only enabled if Color gradient is selected. If checked, the color gradient will get the selected color as the middle color.|
|Object being edited||Selection of the background color for objects in the tree view that are currently edited|
|Active container||Selection of the background color for active containers in the tree view. For example an active PartDesign Body will get the selected background color.|
This tab is only available if the Mesh Workbench has been loaded.
On the Mesh view tab you can specify the following:
|Default mesh color||Selection of the default shape color|
|Default line color||Selection of the default line color|
|Mesh transparency||Specification of the default mesh transparency|
|Line transparency||Specification of the default line transparency|
|Two-side rendering||If checked, the color of the interior side of faces will be the same as the exterior side. If not checked either the backlight color, if enabled, or black will be used instead.|
|Show bounding-box for highlighted or selected meshes||If checked, a yellow bounding box will be displayed for highlighted or selected meshes|
|Define normal per vertex||If checked, Phong shading is used, otherwise flat shading. Shading defines the appearance of surfaces. With flat shading the surface normals are not defined per vertex. This leads to an unrealistic appearance for curved surfaces. While Phong shading leads to a more realistic, smoother appearance.|
|Crease angle||The crease angle is a threshold angle between two faces. It can only be set if the option Define normal per vertex is used.
This preferences section has a single tab: Available Workbenches.
To preserve resources, FreeCAD does not automatically load all available workbenches. And only if a workbench has been loaded will its preferences, if any, appear in the Preferences editor.
In FreeCAD version 0.19 the tab has a different label: Unloaded Workbenches, and the tab displays a list of installed workbenches that have not yet been loaded. To load one or more workbenches select them in the list and then press thebutton.
In FreeCAD version 0.20 the Available Workbenches tab displays a list of all installed workbenches. To load a workbench press itsbutton. If you check a workbench's Autoload checkbox it will autoload when FreeCAD starts up. Loading more workbenches will make the startup slower, but switching between workbenches that have already been loaded is faster.
If a newly loaded workbench has dedicated preference they will appear in a new section in the Preferences editor. Some workbenches add support for additional import and export formats. If there are any related preferences they will appear on one or more new tabs in the Import-Export settings section of the Preferences editor.
For a list of workbench preferences see Workbench preferences
The Import-Export settings affect how files are imported and exported. They are described on the Import Export Preferences page.
Preferences for the more common workbenches are linked below. Some workbenches have no preferences. Other optional workbenches may not be listed. These links are also listed in Category:Preferences
- Arch Preferences
- Draft Preferences
- Drawing Preferences (none) obsolete in version 0.16
- FEM Preferences
- Image Preferences (none)
- Inspection Preferences (none)
- Mesh Design Preferences (none)
- OpenSCAD Preferences
- Part Preferences: the Part workbench also uses the PartDesign Preferences
- PartDesign Preferences
- Path Preferences
- Plot Preferences (none)
- Points Preferences (none)
- Raytracing Preferences
- Reverse Engineering Preferences (none)
- Robot Preferences (none)
- Sketcher Preferences
- Spreadsheet Preferences (none)
- Start Preferences
- Surface Preferences (none)
- TechDraw Preferences
- Test Framework Preferences (none)
- Web Preferences (none)
- A2plus Preferences
- Ship Preferences (none)
See also: FreeCAD Scripting Basics.
For a scripting example see Std DlgParameter.