To start the Preferences editor select the Edit → Preferences... option from the menu. On the Mac OS the Preferences... option appears in the FreeCAD menu instead (this is the default place for preferences on the Mac).
FreeCAD uses a workbench concept, where each workbench is responsible for specific tasks and functions. A workbench can have its own preferences. These will only appear in the Preferences editor if the workbench has been loaded in the current FreeCAD session. See Workbenches below for more information.
If no workbench is loaded, five sections appear in the Preferences editor: General, Display, Workbenches, Addon Manager and Import-Export. Any workbenches that have been loaded, and have their own preferences, will appear below these.
Please note that pressing thebutton in the lower left corner of the Preferences dialog will reset all FreeCAD preferences to their default values.
This preferences section has 9 tabs: General, Document, Selection, Cache, Editor, Python console, Output window, Macro, and Units.
On the General tab you can specify the following:
|Change language||Specifies the language of the FreeCAD user interface.|
|Number format introduced in version 0.20||Specifies the number format. The options are:
|Substitute decimal separator introduced in version 0.20||If checked, the numerical keypad decimal separator will be substituted with the separator defined by the Number format setting (restart required).|
|Preference packs introduced in version 0.20||Lists the available preference packs and also allows you to save new packs.|
|Size of recent file list||Specifies how many files should be listed in the recent files list.|
|Enable tiled background||If checked, the background of FreeCAD's main window will by default consist of tiles of this image:
This option only has an effect if no Style sheet is selected.
The image can be changed by adding the folders Gui/Images in the folder:
%APPDATA%/FreeCAD (on Windows),
$HOME/.FreeCAD (on Linux) or
$HOME/Library/Preferences/FreeCAD (on MacOS).
Place a file named background.png in the Images folder, and uncheck/check this option to see the changed file.
|Enable cursor blinking||If checked the text cursor in the Python console and the Macro editor will blink.|
|Style sheet||Specifies a style sheet. Style sheets define how the user interface of FreeCAD looks. For technical details about style sheets see themes.|
|Size of toolbar icons||Specifies the size of the toolbar icons. The options are:
|Tree view mode||Defines how the tree view is shown in the user interface (restart required). The options are:
|Auto load module after start up||The workbench that will be activated when FreeCAD is started.|
|Enable splash screen at start up||If checked, a splash screen is shown when starting FreeCAD.
The splash screen image can be changed by placing a file named splash_image.png in the Images folder already mentioned under Enable tiled background.
On the Document tab you can specify the following:
|Create new document at start up||If checked, FreeCAD will create a new document when started.|
|Document save compression level||Specifies the compression level for FCStd files. FCStd files are ZIP-compressed files. Therefore you can rename their suffix .FCStd to .zip and open them with a ZIP archive program.|
|Using Undo/Redo on documents||If checked, all changes in documents are stored so that they can be undone/redone.|
|Maximum Undo/Redo steps||Specifies how many Undo/Redo steps should be recorded.|
|Allow aborting recomputation||If checked, recomputations can be aborted by pressing. This may slightly increase the recomputation time.|
|Run AutoRecovery at startup||If there is a recovery file available FreeCAD will automatically run a file recovery when it is started. This way files can be restored if a crash occurred.|
|Save AutoRecovery information every||Specifies how often a recovery file is written.|
|Save thumbnail into project file when saving document||If checked, a thumbnail will be stored when the document is saved. The thumbnail will for example be shown in the list of recent files in the Start Workbench. It is possible to select a Size between 128×128 and 512×512 pixels for the thumbnail. Common sizes are powers of two: 128, 256, 512.|
|Add the program logo to the generated thumbnail||If checked, the FreeCAD program logo will be added to the thumbnail.|
|Maximum number of backup files to keep when resaving document||If checked, backup files will be kept when saving the document. You can specify the number of backup files to keep. Backup files are previously saved versions of the document. The first backup file will have the file suffix .FCStd1, the second .FCStd2 and so on.|
|Use date and FCBak extension||If checked, backup files will get the extension .FCbak and their file names get a date suffix according to the specified Date format. For a description of the date format see this site.
With the default settings a backup file will for example get this name TD-Cube.20200315-215654.FCBak (original filename is TD-Cube.FCStd).
|Allow duplicate object labels in one document||If checked, objects can have the same label.|
|Disable partial loading of external linked objects||If partial loading of external linked objects is enabled, only the referenced objects and their dependencies will be loaded when the linked document is auto opened together with the main document. Such a partially loaded document cannot be edited. Double click the document icon in the tree view to reload it in full. A more detailed explanation of this feature can be found on the Assembly3 documentation page.|
|Author name||All created documents will get the specified author name. Keep the author field blank if you do not want to include this information. If the option Set on save is checked, the field Last modified by will be set to the specified author when saving the file. This field can be viewed using the File → Project information menu option.|
|Company||All created documents will get the specified company name.|
|Default license||Specifies the license for new documents. For predefined licenses the License URL will automatically be set accordingly. Select Other for a custom license.|
|License URL||Specifies an URL describing the license selected in Default license.|
On the Selection tab (introduced in version 0.19) you can specify the following:
|Auto switch to the 3D view containing the selected item||Enables the Tree view SyncView mode.|
|Auto expand tree item when the corresponding object is selected in 3D view||Enables the Tree view SyncSelection mode.|
|Preselect the object in 3D view when mouse over the tree item||Enables the Tree view PreSelection mode.|
|Record selection in tree view in order to go back/forward using navigation button||Enables the Tree view RecordSelection mode.|
|Add checkboxes for selection in document tree||Each Tree view item will get a checkbox. This is for example useful for selecting multiple items on a touchscreen.|
These preferences are related to the cache directory where FreeCAD stores temporary files.
On the Cache tab (introduced in version 0.20) you can specify the following:
|Location||Specifies the path of the cache directory.|
|Check periodically at program start||Controls the frequency with which the directory size is checked. The options are:
|Cache size limit||Specifies the maximum size of the directory. You will be notified if a check is performed and the size exceeds this value. The options are:
|Current cache size||Shows the current size of the directory, if available. Press thebutton to update the value.|
These preferences control the behavior of the Macro editor. This editor can be opened using the Macro → Macros... → Edit or Create menu option.
The color and font settings are also used by the Python console.
On the Editor tab you can specify the following:
|Enable line numbers||If checked, the code lines will be numbered.|
|Enable block cursor||If checked, the cursor will have a block shape.|
|Tab size||Specifies the tabulator raster (how many spaces). If it is for example set to 6, pressingwill jump to character 7 or 13 or 19 etc., depending on the current cursor position. This setting is only used if Keep tabs is selected.|
|Indent size||Specifies how many spaces will be inserted when pressing. This setting is only used if Insert spaces is selected.|
|Keep tabs||If selected, pressingwill insert a tabulator with the raster defined by Tab size.|
|Insert spaces||If selected, pressingwill insert the amount of spaces defined by Indent size.|
|Display Items||Specifies the code type the color and font settings will be applied to. The result can be checked in the Preview field.|
|Family||Specifies the font family that should be used for the selected code type.|
|Size||Specifies the font size that should be used for the selected code type.|
|Color||Specifies the color that should be used for the selected code type.|
These preferences control the behavior of the Python console. This console can be opened using the View → Panels → Python console menu option.
Note that the color and font settings for the console are defined on the Editor tab.
On the Python console tab (introduced in version 0.20) you can specify the following:
|Enable word wrap||If checked, words will be wrapped if they exceed the available horizontal space in the console.|
|Enable block cursor||If checked, the cursor will have a block shape.|
|Save history||If checked, Python history is saved across sessions.|
Theses preferences control the behavior of the Report view. This panel can be opened using the View → Panels → Report view menu option.
On the Output window tab you can specify the following:
|Record normal messages||If checked, normal messages will be recorded. They will be displayed in the Report view with the color set in Normal messages.|
|Record log messages||If checked, log messages will be recorded. They will be displayed in the Report view with the color set in Log messages.|
|Record warnings||If checked, warnings will be recorded. They will be displayed in the Report view with the color set in Warnings.|
|Record error messages||If checked, error messages will be recorded. They will be displayed in the Report view with the color set in Errors.|
|Show report view on error||If checked, the Report view will be shown automatically when an error is recorded.|
|Show report view on warning||If checked, the Report view will be shown automatically when a warning is recorded.|
|Show report view on normal message||If checked, the Report view will be shown automatically when a normal message is recorded.|
|Show report view on log message||If checked, the Report view will be shown automatically when a log message is recorded.|
|Include a timecode for each entry||If checked, each message and warning will receive a timecode.|
|Normal messages||Specifies the font color for normal messages.|
|Log messages||Specifies the font color for log messages.|
|Warnings||Specifies the font color for warning messages.|
|Errors||Specifies the font color for error messages.|
|Redirect internal Python output to report view||If checked, internal Python output will be redirected from the Python console to the Report view.|
|Redirect internal Python errors to report view||If checked, internal Python error messages will be redirected from the Python console to the Report view.|
On the Macro tab you can specify the following:
|Run macros in local environment||If checked, variables defined by macros are created as local variables, otherwise as global Python variables.|
|Macro path||Specifies the path for macro files.|
|Record GUI commands||If checked, recorded macros will also contain user interface commands.|
|Record as comment||If checked, recorded macros will also contain user interface commands, but as comments. This is useful if you don't want to execute these commands when running the macro, but do want to see what has been done while recording.|
|Show script commands in python console||If checked, the commands executed by macro scripts are shown in the Python console. This console can be opened using the View → Panels → Python console menu option.|
|Size of recent macro list||Controls the number of recent macros to display in the menu.|
|Shortcut count||Controls the number of recent macros that get dynamically assigned shortcuts.|
|Keyboard Modifiers||Controls which keyboard modifiers are used for the shortcuts, example Ctrl+Shift+ creates shortcuts in the form of Ctrl+Shift+1, Ctrl+Shift+2, etc.|
On the Units tab you can specify the following:
|Unit system||Specifies the unit system to be used for all parts of FreeCAD.|
|Number of decimals||The number of decimals that should be shown for numbers and dimensions.|
|Minimum fractional inch||Minimum fractional inch that should be displayed. This setting is only available if the unit system Building US (ft-in/sqft/cuft) is used.|
This preferences section has three standard tabs: 3D View, Navigation and Colors. A fourth tab, Mesh view, is added if the Mesh Workbench has been loaded.
On the 3D View tab you can specify the following:
|Show coordinate system in the corner||If checked, the main coordinate system will be shown in the lower right corner of the 3D view.
The Relative size (introduced in version 0.20) defines the size of the representation as a percentage of the view size (the minimum of its height and width).
|Show axis cross by default introduced in version 0.19||If checked, the axis cross will be shown by default in the 3D view.|
|Show counter of frames per second||If checked, the time needed for the last operation and the resulting frame rate will be shown in the lower left corner of the 3D view.|
|Remember active workbench by tab introduced in version 0.19||If checked, the application will remember the active workbench for each tab in the Main view area independently. When switching to a tab this workbench will be restored automatically.|
|Use software OpenGL introduced in version 0.19||If checked, OpenGL will use the CPU instead of the GPU. This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application.|
|Use OpenGL VBO (Vertex Buffer Object)||If checked, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. VBOs offer substantial performance gains because the data resides in the graphics memory rather than the system memory and so it can be rendered directly by the GPU. For more background info see this webpage.|
|Render Cache introduced in version 0.19||"Render Cache" or "Render Acceleration" is explained in more detail in FreeCAD_assembly3 render-caching. The options are:
|Anti-Aliasing||Specifies if and what type of multisample anti-aliasing is used|
|Transparent objects introduced in version 0.19||Specifies the render type of transparent objects. The options are:
|Marker size||Specifies the size of vertices (points) in the Sketcher Workbench. The clickable area of points can be additionally enlarged by increasing the Pick radius.|
|Pick radius (px)||Sets the area for picking elements in the 3D view. Larger value makes it easier to pick things, but can make some small features impossible to select.|
|Eye to eye distance for stereo modes||Specifies the eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed.|
|Backlight color||If checked, backlight is enabled with the defined color. Backlight is used for rendering the back sides of faces. Usually, you don't see them in solids, unless you slice one with a clipping plane, or if the faces aren't oriented correctly. It is only active for objects whose Lighting property (on the View tab) is set to One side. If disabled, back sides of faces of objects in One side lighting mode will be black.
The related Intensity setting specifies the intensity of the backlight.
|Camera type||Specifies the camera projection type. The options are:|
On the Navigation tab you can specify the following:
|Navigation cube||If checked, the Navigation cube will be shown in the 3D view.
Steps by turn defines the number of steps required for a full rotation when using the Navigation cube rotation arrows.
Corner defines where the Navigation cube is displayed in the 3D view.
If Rotate to nearest is checked, the 3D view is rotated to the nearest most logical position, based on the current orientation of the cube, when a cube face is clicked. Else clicking a face will always result in the same rotation. introduced in version 0.20
Cube size defines the size of the cube. introduced in version 0.20
|3D Navigation||Specifies a mouse navigation style. To see the details of each style, select it and then press the button.|
|Orbit style||Specifies the rotation orbit style used when in rotation mode. The options are:
|Rotation mode||Defines the rotation center. The options are:
|Default camera orientation||Specifies the camera orientation for new documents. This setting is also used by the Std ViewHome command.|
|Camera zoom||Affects the initial camera zoom level for new documents. The value you set is the diameter of a sphere that fits in 3D view. The default is 100 mm. It also sets the initial size of origin features (base planes in new PartDesign Bodies and Std Parts).|
|Enable animation||If checked, and 3D Navigation is set to CAD, rotations can be animated. If the mouse is moved while the scroll wheel and the right mouse button are pressed, the view is rotated. If one keeps the mouse moving while releasing the right mouse button, the rotation will continue. To end this animation left-click with the mouse.|
|Zoom at cursor||If checked, zoom operations will be performed at the position of the mouse pointer. Otherwise zoom operations will be performed at the center of the current view. The Zoom step defines how much will be zoomed. A zoom step of 1 means a factor of 7.5 for every zoom step.|
|Invert zoom||If checked, the direction of zoom operations will be inverted.|
|Disable touchscreen tilt gesture||If checked, the tilting gesture will be disabled for pinch-zooming (two-finger zooming) if 3D Navigation is set to Gesture.|
On the Colors tab you can specify the following:
|Enable preselection highlighting||If checked, preselection is turned on and the specified color will be used for it. Preselection means that for example edges in parts will be highlighted while hovering over them with the mouse to indicate they can be selected.|
|Enable selection highlighting||If checked, selection highlighting is turned on and the specified color will be used for it.|
|Simple color||If selected, the background of the 3D view will have the selected color.|
|Color gradient||If selected, the background of the 3D view will have a vertical color gradient. The first color is the color at the top of the 3D view, the second the color at the bottom.|
|Middle color||This option is only enabled if Color gradient is selected. If checked, the color gradient will get the selected color as the middle color.|
|Object being edited||Specifies the background color for objects in the tree view that are currently edited.|
|Active container||Specifies the background color for active containers, for example an active PartDesign Body, in the tree view.|
This tab is only available if the Mesh Workbench has been loaded.
On the Mesh view tab you can specify the following:
|Default mesh color||Selection of the default shape color|
|Default line color||Selection of the default line color|
|Mesh transparency||Specifies the default mesh transparency|
|Line transparency||Specifies the default line transparency|
|Two-side rendering||If checked, the color of the interior side of faces will be the same as the exterior side. If not checked either the backlight color, if enabled, or black will be used instead.|
|Show bounding-box for highlighted or selected meshes||If checked, a yellow bounding box will be displayed for highlighted or selected meshes|
|Define normal per vertex||If checked, Phong shading is used, otherwise flat shading. Shading defines the appearance of surfaces. With flat shading the surface normals are not defined per vertex. This leads to an unrealistic appearance for curved surfaces. While Phong shading leads to a more realistic, smoother appearance.|
|Crease angle||The crease angle is a threshold angle between two faces. It can only be set if the option Define normal per vertex is used.
This preferences section has a single tab: Available Workbenches.
To preserve resources, FreeCAD does not automatically load all available workbenches. And only if a workbench has been loaded will its preferences, if any, appear in the Preferences editor.
In FreeCAD version 0.19 the tab has a different label: Unloaded Workbenches, and the tab displays a list of installed workbenches that have not yet been loaded. To load one or more workbenches select them in the list and then press thebutton.
In FreeCAD version 0.20 the Available Workbenches tab displays a list of all installed workbenches. To load a workbench press itsbutton. If you check a workbench's Autoload checkbox it will autoload when FreeCAD starts up. Loading more workbenches will make the startup slower, but switching between workbenches that have already been loaded is faster.
If a newly loaded workbench has dedicated preference they will appear in a new section in the Preferences editor. Some workbenches add support for additional import and export formats. If there are any related preferences they will appear on one or more new tabs in the Import-Export section of the Preferences editor.
For a list of workbench related preferences see Workbench related preferences
This preferences section has a single tab: Addon manager options.
Addon manager options
These preferences control the behavior of the Addon manager.
On the Addon manager options tab (introduced in version 0.20) you can specify the following:
|Automatically check for updates at start (requires GitPython)||If checked, the Addon manager will check for updates when it is launched. GitPython and git must be installed for this to work.|
|Download Macro metadata (approximately 10MB)||If checked, macro metadata is downloaded for display in the Addon manager's main addon listing. This data is cached locally.|
|Cache update frequency||Controls the frequency with which the locally cached addon availability and metadata information is updated. The options are:
|Hide Addons marked Python 2 Only||If checked, addons marked as "Python 2 Only" are not included in the listing. These addons are unlikely to work in the current FreeCAD version.|
|Hide Addons marked Obsolete||If checked, addons marked as "Obsolete" are not included in the listing.|
|Hide Addons that require a newer version of FreeCAD||If checked, addons that require a newer FreeCAD version are not included in the listing.|
|Custom repositories (one per line)||Custom repositories can be specified here. They should include the name of the branch you intend to use (typically "master" or "main").|
|Proxy||The Addon manager includes experimental support for proxies requiring authentication, set up as user-defined proxies.|
|Python executable (optional)||The Addon manager attempts to determine the Python executable that should be used for the automatic pip-based installation of Python dependencies. To override this selection, the path to the executable can be set here.|
|Show option to change branches (requires GitPython)||For developers and beta-testers, the Addon manager can provide an interface on the addon's details screen that allows switching which git branch is currently checked out. This is intended for advanced users only, as it is possible that a non-primary-branch version of the Addon may result in instability and compatibility issues. GitPython must be installed for this to work. Use with caution.|
The Import-Export preferences affect how files are imported and exported. They are described on the Import Export Preferences page.
Preferences for the built-in workbenches are linked below. Some workbenches have no preferences. These links are also listed in Category:Preferences.
- Arch Preferences
- Draft Preferences
- Drawing Preferences (none) obsolete in version 0.16
- FEM Preferences
- Image Preferences (none)
- Inspection Preferences (none)
- Mesh Design Preferences
- OpenSCAD Preferences
- Part Preferences: the Part workbench also uses the PartDesign Preferences
- PartDesign Preferences
- Path Preferences
- Points Preferences (none)
- Raytracing Preferences
- Reverse Engineering Preferences (none)
- Robot Preferences (none)
- Sketcher Preferences
- Spreadsheet Preferences
- Start Preferences
- Surface Preferences (none)
- TechDraw Preferences
- Test Framework Preferences (none)
- Web Preferences (none)
See also: FreeCAD Scripting Basics.
For a scripting example see Std DlgParameter.