Path Workbench/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Przepływ pracy środowiska FreeCAD Path tworzy te instrukcje maszynowe w następujący sposób: * Model 3D jest obiektem bazowym, zwykle tworzonym przy użyciu jednego lub wi...")
(Created page with "==Koncepcje ogólne==")
Line 25: Line 25:
* Wyeksportuj zadanie z G-kodem, dopasowanym do Twojej maszyny. Ten krok nazywany jest ''postprocesowaniem''. Dostępne są różne postprocesory.
* Wyeksportuj zadanie z G-kodem, dopasowanym do Twojej maszyny. Ten krok nazywany jest ''postprocesowaniem''. Dostępne są różne postprocesory.


==Koncepcje ogólne==
== General concepts ==


The Path Workbench generates G-code defining the paths required to mill the Project represented by the 3D model on the target mill in [[Path_scripting#The_FreeCAD_Internal_GCode_Format|the Path Job Operations FreeCAD G-code dialect]], which is later translated to the appropriate dialect for the target CNC controller by selecting the appropriate postprocessor.
The Path Workbench generates G-code defining the paths required to mill the Project represented by the 3D model on the target mill in [[Path_scripting#The_FreeCAD_Internal_GCode_Format|the Path Job Operations FreeCAD G-code dialect]], which is later translated to the appropriate dialect for the target CNC controller by selecting the appropriate postprocessor.

Revision as of 14:38, 25 May 2022


Ikonka FreeCAD dla środowiska pracy Path

Wprowadzenie

Środowisko pracy Path jest używany do tworzenia instrukcji maszynowych dla maszyn CNC z modelu 3D FreeCAD. Instrukcje te wytwarzają rzeczywiste obiekty 3D na maszynach CNC, takich jak frezarki, tokarki, wycinarki laserowe i podobne. Zazwyczaj instrukcje są dialektem G-code. Przedstawiono tu ogólny przykład symulacji sekwencji ścieżki narzędzia tokarki CNC.

Przepływ pracy środowiska FreeCAD Path tworzy te instrukcje maszynowe w następujący sposób:

  • Model 3D jest obiektem bazowym, zwykle tworzonym przy użyciu jednego lub więcej środowisk pracy Projekt Części, Część lub . Rysunek Roboczy.
  • W środowisku Path tworzone jest Zadamnie. Zawiera ono wszystkie informacje potrzebne do wygenerowania niezbędnego G-kodu do obróbki zadania na frezarce CNC: jest materiał magazynowy, frezarka ma określony zestaw narzędzi i wykonuje określone polecenia kontrolujące prędkość i ruchy (zwykle G-kod).
  • Narzędzia są wybierane zgodnie z wymaganiami zadania.
  • Ścieżki frezowania są tworzone przy użyciu np. operacji konturu i kieszeni. Te obiekty ścieżek używają wewnętrznego dialektu kodu G FreeCAD, niezależnego od maszyny CNC.
  • Wyeksportuj zadanie z G-kodem, dopasowanym do Twojej maszyny. Ten krok nazywany jest postprocesowaniem. Dostępne są różne postprocesory.

Koncepcje ogólne

The Path Workbench generates G-code defining the paths required to mill the Project represented by the 3D model on the target mill in the Path Job Operations FreeCAD G-code dialect, which is later translated to the appropriate dialect for the target CNC controller by selecting the appropriate postprocessor.

The G-code is generated from directives and Operations contained in a Path Job. The Job Workflow lists these in the order they will be executed. The list is populated by adding Path Operations, Path Dressups, Path Supplemental Commands, and Path Modifications from the Path Menu, or GUI buttons.

The Path Workbench provides a Tool Manager (Library, Tool-Table), and G-code Inspection, and Simulation tools. It links the Postprocessor, and allows importing and exporting Job Templates.

The Path Workbench has external dependencies including:

  1. The FreeCAD 3D model units are defined in the Edit → Preference → General → Units tab's Units settings. The Postprocessor configuration defines the final G-code units.
  2. The Macro file path, and Geometric tolerances, are defined in the Edit → Preferences → Path → Job Preferences tab.
  3. Colors are defined in the Edit → Preferences → Path → Path colors tab.
  4. Holding tag parameters are defined in the Edit → Preferences → Path → Dressups tab.
  5. That the Base 3D model quality supports the Path workbench requirements, passes Check Geometry.

Limitations

Some current limitations of which you should be aware are:

  • Most of the Path Tools are not true 3D tools but only 2.5D capable. This means that they take a fixed 2D shape and can cut it down to a given depth. However, there are two tools which produce true 3D paths: 3D Pocket and 3D Surface (which is still an experimental feature as of November 2020).
  • Most of Path workbench is designed for a simple, standard 3-axis (xyz) CNC mill/router, but lathe tools are under development in 0.19_pre.
  • Most operations in Path workbench will return paths based on a standard endmill tool/bit only, regardless of the tool/bit type assigned in a given tool controller with the exception of the Engrave and 3D Surface operations.
  • The operations within the Path workbench are not aware of clamping mechanisms in use to secure the model to your machine. Consequently, please review and simulate the paths you generate prior to sending the code to your machine. If necessary, model your clamping mechanisms in FreeCAD in order to better inspect the paths generated. Look for possible collisions with clamps or other obstacles along the paths.

Units

Unit handling in Path can be confusing. There are several points to understand:

  1. FreeCAD base units for length and time are 'mm' and 's' respectively. Velocity is thus 'mm/s'. This is what FreeCAD stores internally regardless of anything else
  2. The default unit schema uses the default units. If you're using the default schema and you enter a feed rate without a unit string, it will get entered as 'mm/s'
  3. Most CNC machines expect feed rate in the form of either 'mm/min' or 'in/min'. Most post-processors will automatically convert the unit when generating gcode.

Schemas:

  1. Changing schema in preferences changes default unit string for the input fields. If you're a Path user and prefer to design in metric, it's highly recommended that you use the "Metric Small Parts & CNC" schema. If you design in US units, either the Imperial Decimal and Building US will work
  2. Changing your preferred unit schema will have no effect on output but will help avoid input errors

Output:

  1. Generating the correct unit in output is the responsibility of the post-processor and is done only at that time
  2. Machine output unit is completely unrelated to your selected unit schema
  3. Post-processors produce either metric (G21) output, Imperial (G20) output or are configurable.
  4. Configurable post-processors default to metric (G21)
  5. If you want your configurable post-processor to output imperial gcode (G20), Set the correct argument in your job output configation (ie --inches for linuxcnc). This can be stored in a job template and set as your default template to make it automatic for all future jobs

Path Inspection:

  1. If you use the Path Inspect tool to look at g-code, you will see it in 'mm/s' because it is not being post-processed

Heights and depths

Many of the commands have various heights and depths:

Visual reference for Depth properties (settings)

Commands

Some commands are experimental and not available by default. To enable them see Path experimental.

Project Commands

  • Job: Creates a new CNC job.

Tool Commands

  • CAM Simulator: Shows the milling operation like it's done on the machine.

Basic Operations

  • Pocket Shape: Creates a pocketing operation from one ore more selected pocket(s).
  • Face: Creates a surfacing path.
  • Helix: Creates a helical path.
  • Adaptive: Creates an adaptive clearing and profiling operation.
  • Engrave: Creates an engraving path.

3D Operations

Path Dressup

  • Tag Dressup: Adds a holding tag dressup modification to a selected path.

Supplemental Commands

  • Fixture: Changes the fixture position.
  • Comment: Inserts a comment in the G-code of a path.
  • Stop: Inserts a full stop of the machine.
  • Custom: Inserts custom G-code.

Path Modification

  • Array: Creates an array by duplicating a selected path.
  • Simple Copy: Creates a non-parametric copy of a selected path object.

Miscellaneous

Obsolete

  • Tool Manager: Edit the Tool Manager. 'Legacy' tool system. version 0.18 and below

ToolBit architecture

Manage tools, bits, and the Tool Library. Based on the ToolBit architecture. introduced in version 0.19

Other

  • Path FAQ: The Path Workbench shares many concepts with other CAM software packages but has its own peculiarities. If something seems wrong this is a good place to start.
  • Path SetupSheet: You can use a SetupSheet to customize how various property values for operations are calculated.
  • Path Postprocessor Customization: If you have a special machine which cannot use one of the available post-processors you may need to write your own post-processor.
  • Path fourth axis: Experimental four axis milling.

Preferences

Scripting

See Path scripting.

Tutorials

Videos

Roadmap