CAM ToolShape

Other languages:

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Tools

ToolBit

Path

Description

ToolShapes are a core part of the Path Tools system. ToolShapes are the templates from which ToolBits are created. They represent the specific physical shape of a tool. A ToolShape does not completely describe the bit - for that some additional parameters are needed which will be added when an actual bit is parameterized from the template.

Initially ToolShapes are just FreeCAD documents with a single Body created from the Part Design workbench.

Creating new ToolShapes is an advanced topic. The most commonly needed ToolShapes already exist and are provided with the FreeCAD installation at:

On Linux it is usually /usr/lib64/FreeCAD/Mod/Path/Tools/Shape
On Windows it is usually C:\Program Files\FreeCAD\Mod\Path\Tools\Shape
On macOS it is usually /Applications/FreeCAD/Mod/Path/Tools/Shape

They are:

ballend.fcstd

bullnose.fcstd

chamfer.fcstd

drill.fcstd

endmill.fcstd

probe.fcstd

slittingsaw.fcstd

thread-mill.fcstd

v-bit.fcstd

These can be found in the /Mod/Path/Tools/Shape/ subdirectory where FreeCAD was installed.

Usage

Create a new FreeCAD document.
Open the PartDesign Workbench.
Create a Body and give the Body a label you want to show up in the bit selection.
Create a Sketch on the XZ plane and draw half the profile of the bit.
Constrain the bottom most center of the bit on the origin (0,0). This will be the center of the axis on which the G-code will rotate the bit.
- Note: Do not add dimensional constraints at this time.
Close the Sketch.
Revolve the Sketch around the vertical Sketch axis.
Open the Path Workbench.
Select the Sketch in the Tree view. This ensures that the PropertyBag created in the next step will be nested in the Body.
Select the Path → Utils → PropertyBag option from the menu.
A PropertyBag named Attributes is created. This PropertyBag will control the variables in the Sketch.
Double-click the PropertyBag in the Tree view.
The Property Bag task panel opens.
Click the Add... button.
The Create Property dialog opens.
Create a property named Diameter. This property is mandatory for Toolbits. Property names are case-sensitive and may not contain spaces.
Select Shape from the Group dropdown list.
Select the appropriate Type.
Optionally specify a ToolTip.
Click the OK button.
In the Property Bag task panel enter a value for the Diameter property.
Similarly add all other required properties.
Click the OK button in the Property Bag task panel when done.
Double-click the Sketch in the Tree view.
Add dimensional constraints and apply the properties from the created PropertyBag. For example to apply the Diameter property:
1. Double-click a dimension.
2. Click the icon.
3. Enter <<Attributes>>.Diameter in the Formula editor.
4. Click the OK button twice.
Repeat this until the Sketch is fully constrained.
Save the FCStd file where FreeCAD expects to find ToolBit files.

- EndNote 1. If you are denied access to this file in Windows, start FreeCad in ADMINISTRATOR mode and it will allow access to the folder. You are finally done! Use this new custom built ToolShape in the normal fashion in addition to the standard ToolBits using the PATH workbench.
- EndNote 2. The BODY of the Toolbit MUST be listed FIRST in the Combo View FileTree hierarchical structure. These instructions will produce this important structural order to create a successful ToolBit Shape.

Tool Thumbnail Images

Toolbits will have a small icon image of the tool in the tree if the image is saved with thumbnails active.

Important notes:

Before saving the document make sure you have Save Thumbnail selected, and Add program logo deselected in FreeCAD's preferences.
Also make sure to switch to Front View and Fit content to screen
Whatever you see when saving the document will end up being the visual representation of the template