CAM Simulator: Difference between revisions
No edit summary |
No edit summary |
||
Line 9: | Line 9: | ||
==Usage== <!--T:4--> |
==Usage== <!--T:4--> |
||
# Press the {{KEY|[[Image: |
# Press the {{KEY|[[Image:Path_Simulator.png|16px]] [[Path Path_Simulator|Path Simulator]]}} button |
||
# De-select any Operations that are not to be simulated |
# De-select any Operations that are not to be simulated |
||
# Tune the Speed and Accuracy settings. |
# Tune the Speed and Accuracy settings. |
Revision as of 19:59, 17 January 2018
Path Simulator |
Menu location |
---|
Path → Cam Simulator |
Workbenches |
Path |
Default shortcut |
None |
Introduced in version |
- |
See also |
Path_Inspect |
Description
This tool allows Simulation of the Path Job by sweeping 3D Models of the Tools used in each Operation, along the G-Code paths, subtracting material from the Stock, where the stock and tool overlap, providing visualization of the Job allowing detection and isolation of errors prior to running the Job on a mill.
Usage
- Press the Path Simulator button
- De-select any Operations that are not to be simulated
- Tune the Speed and Accuracy settings.
- Select the Job for simulation from the drop menu.
- Press the Fast Forward or Play buttons to either skip directly to the result, or play back an animation of the operations.
- Pause, and Single-Step functionality is provided for resolving specific cuts or movements.
Properties
- need usage
- DataPlayback Speed: The speed of the simulation playback, in G-Code lines/second
- DataAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job
- DataJob: The Job used as the basis of the simulation
- DataOperation List: The list of Operations selected for inclusion in the simulation.
- need options