Path: Profile

Other languages:

Engrave

Helix

Path

Menu location
Path Profile
Path → New Operation → Profile
Workbenches
Path
Default shortcut
P,P
Introduced in version
-
See also
None

Descriere

Instrumentul Contur creează o simplă tăiere a conturului exterior al obiectelor 3D complexe Part. Întregul model de lucru servește ca intrare la Operație, indiferent dacă geometria corpului este selectată atunci când este apelată comanda Contour. Un punct de pornire poate fi activat din editorul de operațiuni, utilizând o locație definită în Property view->Start Points.

Utilizare

Select a face on a Part-based object. Alternatively, also select a starting edge on that face.
Press the Profile button
Adjust the desired properties

Opţiuni

Obiectul Profilului de Traiectorie este creat ca făcând parte dintr-o operație Path Job. Pentru a configura corect profilul, trebuie să existe o magazie de scule în obiectul mașinii proiectului și o comandă Tool Change trebuie plasat înaintea profilului.

Proprietăți

Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.

Base

Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.

DatePlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
- DateAngle: Angle in degrees applied to rotation of the object around Axis property value
- DateAxis: Axis(one or multiple) around which to rotate the object, set in sub-properties: x, y, z
  - DateX: x axis value
  - DateY: y axis value
  - DateZ: z axis value
- DatePosition: Position of the object, set in sub-properties: x, y, z - with respect to the origin (or origin of parent object container)
  - DateX: x distance value
  - DateY: y distance value
  - DateZ: z distance value
DateLabel: User-provided name of the object (UTF-8)

Depth

DateClearance Height: The height needed to clear clamps and obstructions
DateFinal Depth: Final Depth of Tool- lowest value in Z
DateSafe Height: The above which Rapid motions are allowed.
DateStart Depth: Starting Depth of Tool- first cut depth in Z
DateStep Down: Incremental Step Down of Tool

Path

DateActive: make False, to prevent operation from generating code
DateComment: An optional comment for this Operation
DateUser Label: User assigned label
DateTool Controller: Defines the Tool controller used in the Operation

Profile Properties

Date Side: Partea marginii care urmează a fi tăiată
Date Direction: Directia ca traiectoria sculei ar trebui sa ia in jurul materialului, orara sau antiorar, ClockWise CW sau CounterClockWise CCW
Date RollRadius: Raza de început și de sfârșit
Date OffsetExtra: valoare suplimentară pentru a rămâne în afara profilului final - pentru a asigura o traiectorie laterală a sculei
Date SegLen: Valoarea (mozaicarea poligoanelor de discretizare)/tessellation pentru valorile căilor de unelte realizate din curbele bezzier, b-splinestele și elipsele

Rotation

DateAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
~~DateB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).~~
DateEnable Rotation: Enable rotation to gain access to pockets or areas not normal to Z axis.
DateInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
DateReverse Direction: Reverse orientation of Operation by 180 degrees.

Start Point Properties

DateStart Point: The start point of this path
DateUse Start Point: make True, if specifying a Start Point
DateExtend At Start: extra length of tool path before start of part edge
DateLeadIn Line Len: length of straight segment of toolpath that comes in at angle to first part edge

End Point Properties

DateUse End Point: make True, if specifying an End Point
DateExtend At End: extra length of tool path after end of part edge
DateLeadOut LineLen: length of straight segment of toolpath that comes in at angle to last part edge
DateEnd Point: The end point of this path

Extras, Not-in-use, or Degraded

DateUse Placements: make True, if using the profile operation placement properties to transform toolpath in post processor
DateSegLen: Tesselation value for tool paths made from beziers, bsplines, and ellipses

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above. This section is simply a layout map of the settings in the window editor for the Operation.