CAM Profile: Difference between revisions
mNo edit summary |
Renatorivo (talk | contribs) (Marked this version for translation) |
||
Line 36: | Line 36: | ||
===Height Properties===<!--T:12--> |
===Height Properties=== <!--T:12--> |
||
* {{PropertyData|Safe Height}}: The above which Rapid motions are allowed. |
* {{PropertyData|Safe Height}}: The above which Rapid motions are allowed. |
||
* {{PropertyData|Clearance Height}}: The height needed to clear clamps and obstructions |
* {{PropertyData|Clearance Height}}: The height needed to clear clamps and obstructions |
Revision as of 17:56, 31 January 2018
Path Profile |
Menu location |
---|
Path → New Operation → Profile |
Workbenches |
Path |
Default shortcut |
P,P |
Introduced in version |
- |
See also |
None |
Description
The Contour tool creates a simple external contour cut of complex 3D Part-based objects. The entire Job Model serves as the input for the Operation--regardless of whether any Body Geometry is selected when the Contour command is invoked. A Start point can be enabled from the Operation editor, using a location defined in the Property view->Start Points.
Usage
- Select a face on a Part-based object. Alternatively, also select a starting edge on that face.
- Press the Profile button
- Adjust the desired properties
Options
- The Path Profile object is made to be part of a Path Project. To correctly configure the profiling, a tool table must be present in the project's machine object, and a Tool Change command must be placed before the profile.
Properties
- DataActive: Make False, to prevent operation from generating code
- DataUse Placements: make True, if using the profile operation placement properties to transform toolpath in post processor
- DataTool Controller: The Tool controller specifies the index of the Tool to use
Depth Properties
- DataStart Depth: Starting Depth of Tool- first cut depth in Z
- DataFinal Depth: Final Depth of Tool- lowest value in Z
- DataStep Down: Incremental Step Down of Tool
Height Properties
- DataSafe Height: The above which Rapid motions are allowed.
- DataClearance Height: The height needed to clear clamps and obstructions
Operation Properties
- DataTool Controller: Defines the Tool controller used in the Operation
- DataDirection: Specifies a CW or CCW path for the External contour cut
- DataUse Start Point: make True, if manually specifying a Start Point, then enter Start Points in the Property data Start Points field
Start Point Properties
- DataStart Point: The start point of this path
- DataUse Start Point: make True, if specifying a Start Point
- DataExtend At Start: extra length of tool path before start of part edge
- DataLeadIn Line Len: length of straight segment of toolpath that comes in at angle to first part edge
End Point Properties
- DataUse End Point: make True, if specifying an End Point
- DataExtend At End: extra length of tool path after end of part edge
- DataLeadOut LineLen: length of straight segment of toolpath that comes in at angle to last part edge
- DataEnd Point: The end point of this path
Profile Properties
- DataSide: Side of edge that tool should cut
- DataDirection: The direction that the toolpath should go around the part ClockWise CW or CounterClockWise CCW
- DataOffsetExtra: Extra value to stay away from final profile- good for roughing toolpath
- DataSegLen: Tesselation value for tool paths made from beziers, bsplines, and ellipses