CAM Helix: Difference between revisions
mNo edit summary |
m (Only Face grabbing is allowed on Drill and Helix per mlampert in forum) |
||
| Line 9: | Line 9: | ||
*Select the Helix tool from the Path->menu, or the GUI Button, and press. |
*Select the Helix tool from the Path->menu, or the GUI Button, and press. |
||
*Choose a Tool controller from the pop-up selection dialogue window and confirm by pressing OK. |
*Choose a Tool controller from the pop-up selection dialogue window and confirm by pressing OK. |
||
*All available holes in the Job Model will be available for processing, listed in the Base Geometry tab. Confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting |
*All available holes in the Job Model will be available for processing, listed in the Base Geometry tab. Confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes. |
||
*Ensure the Depths, Final Depth is correct, and adjust if not. |
*Ensure the Depths, Final Depth is correct, and adjust if not. |
||
*Ensure the Heights, Safe and Clearance Heights are correct, and adjust if not. |
*Ensure the Heights, Safe and Clearance Heights are correct, and adjust if not. |
||
Revision as of 20:53, 18 January 2018
|
|
| Menu location |
|---|
| Path → New Operation → Drilling |
| Workbenches |
| Path |
| Default shortcut |
| P,D |
| Introduced in version |
| - |
| See also |
| None |
Description
The Helix command appends a helical interpolation Operation to the Job.
Usage
- Select the Helix tool from the Path->menu, or the GUI Button, and press.
- Choose a Tool controller from the pop-up selection dialogue window and confirm by pressing OK.
- All available holes in the Job Model will be available for processing, listed in the Base Geometry tab. Confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.
- Ensure the Depths, Final Depth is correct, and adjust if not.
- Ensure the Heights, Safe and Clearance Heights are correct, and adjust if not.
- In the Operation tab, specify the Start From, Direction, and the Step Over percentage.