Path: Punct de Fixare
Path Fixture |
Menu location |
---|
Path → Partial Commands → Fixture |
Workbenches |
Path |
Default shortcut |
P,F |
Introduced in version |
- |
See also |
None |
Descriere
Acest instrument stabilește dispozitivul de decalare a lucrării de la controlerul CNC al mașinii.
Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:
- G53 -> Machine coordinate system.
- G54 -> Scratchpad coordinate system.
- G55 to G59.9 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.
Fixamrea G59 este utilizată pentru a extinde dispozitivele disponibile. Gradul de extindere implementat este specific mașinii CNC, iar această comandă permite prevederea pentru G59.1 până la G59.9.
Utilizare
- Press the Fixture button
- Select the desired Work Offset Fixture from the drop-menu.
Proprietăți
- DateFixture: Sets the current fixture point
- DateActive: Defines if this command is active or not when inserted into a compound