Path: Punct de Fixare

From FreeCAD Documentation
Revision as of 14:05, 29 October 2018 by Luc (talk | contribs)

Path Fixture

Menu location
Path → Partial Commands → Fixture
Workbenches
Path
Default shortcut
P,F
Introduced in version
-
See also
None

Descriere

This tool sets the Work Offset Coordinate Fixture of the machine CNC controller.

Acest instrument stabilește dispozitivul de decalare a lucrării de la controlerul CNC al mașinii.

Coordonatele offset ale jobului țintă includ în mod obișnuit: codurile G53 până la G59. Codul G este pur și simplu o indicație a codului (G53, G54, etc.). Sistemele de schimb de lucru reprezintă:

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-Code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 -> Machine coordinate system.
  • G54 -> Scratchpad coordinate system.
  • G55 to G59.9 -> Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Utilizare

  1. Press the Fixture button
  2. Select the desired Work Offset Fixture from the drop-menu.

Proprietăți

  • DateFixture: Sets the current fixture point
  • DateActive: Defines if this command is active or not when inserted into a compound