Pfad Häufig gestellte Fragen

From FreeCAD Documentation
Revision as of 21:59, 1 February 2020 by Renatorivo (talk | contribs) (Created page with "Category:Path/de")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano


Häufig gestellte Fragen Pfad Arbeitsbereich

Wie viele Achsen kann die Pfad Abeitsbereich handhaben?

Zur Zeit kann die Version 0.18, Pfad Arbeitsbereich bis zu 3 Achsen Fräsen verarbeiten. Derzeit werden die 4. Achsen Fähigkeiten für das nächste offizielle Release entwickelt, wobei einige Pfad Arbeitsbereich Abläufe bereits auf den grundlegenden 4. Achsen Zustand aufgerüstet wurden.

Warum scheint es, dass der Pfad Arbeitsbereich in manchen Fällen mehr als eine Möglichkeit bietet, einen Ablauf festzulegen?

Die Pfad Arbeitsbereich bietet vorhandene Werkzeuge für viele Fräsbearbeitungen, weitere sind in Arbeit, und da FreeCAD quelloffen ist, steht dem Anwender nichts im Wege, seine eigene Funktionalität zu erstellen.

Wie bei der 3D Modellierung stehen oft mehrere Methoden zur Verfügung, die für verschiedene Arbeitsabläufe vorteilhaft sein können. In einigen Fällen werden Kombinationen von Bearbeitungen verwendet, um ein vollständiges Fräsen des Rohteils zu ermöglichen.

Ein gängiges Beispiel ist, dass ein Konturschnitt aus Kanten oder Flächen erzeugt werden kann. In einigen Fällen ist eine geometrische Eingabe gegenüber einer anderen vorteilhaft.

Warum ändert das Aufbereiten eines Arbeitsvorgangswechsel die Position im Auftragsarbeitsablauf, angezeigt in der Liste der Arbeitsgänge?

Alle Ergänzungen zum Arbeitsauftrag--einschließlich Änderungen und Arbeitsgangskopien - werden am Ende des Auftrags Arbeitsablaufs angehängt. Wenn das die korrekte Arbeitsauftragsfolge zerreißt, muß sie im Job-Editor->Workflow-Reiter neu geordnet werden.

Was ist der Unterschied zwischen der lichten Höhe und der sicheren Höhe?

Genauere Informationen findest Du unter Tiefen und Höhen.

Was ist die typische Anwendung des EinrichtungsBlatts?

Das EinrichtungsBlatt ist ein spezielles, in einem Arbeitsauftrag enthaltenes Tabellenblatt, das in der Eigenschaftsansicht modifiziert wurde und nur vom Pfad Arbeitsbereich aus zugänglich ist. Es bietet einen Mechanismus für erfahrenere Benutzer, um Aspekte ihres Arbeitsauftrags mit Hilfe von Werten und Ausdrücken, die im EinrichtungsBlatt enthalten sind, zu konfigurieren.

Current inputs for Depths, Heights, and Tool Controllers include:

  1. Final Depth Expression -- OpFinalDepth
  2. Start Depth Expression -- OpStartDepth
  3. Step Down Expression -- Defaults to OpToolDiameter. This expression is used for each Operation to calculate its default Step down value based on the diameter of the Tool defined in the associated Tool controller.
  4. Clearance Height Expression -- StartDepth+SetupSheet.ClearanceHeightOffset
  5. Clearance Height Offset Value -- Contains value used in Expressions
  6. Safe Height Expression -- StartDepth+SetupSheet.SafeHeightOffset
  7. Safe Height Offset Value -- Contains value used in Expressions
  8. Horizontal Rapid Value -- Provides the default value used to initially populate the Horizontal Rapid Feed rate for all Tool controllers.
  9. Vertical Rapid Value -- Provides the default value used to initially populate the Vertical Rapid Feed rate for all Tool controllers.

This provides flexibility. For example, default expressions are provided, but can be overwritten by the user. The modification can even reduce the default equation to a Value if that suits the user.

What is the typical use of the Job Templates?

Job templates allow commonly used Job definitions to be saved from a Job for use on subsequent similarly configured Jobs.

How many Base objects does Path workbench support?

Support exists only for a single Base object. To create paths for multiple solids in a single Job you can make a Compound out of them and use that as the base object for the Job.

Why does an Operation not produce usable output?

A variety of reasons exist that may cause an individual Operation to generate no output.

One common reason is that the Tool geometry defined in the Tool controller selected for the Operation is too large to fit within the geometry selected on the 3D model for the Operation.

Be aware that this will typically exhibit as a Rapids movement to where the Operation beginning, completed by a Rapid Z movement to the geometry selected to define the Operation, and then a return to Rapid transit height.

Another common misunderstanding is that a Contour Operation is not outputting paths, when the Contour editor Operation->Cut Side is "Inside", the default, and toggling the 3D Model viability allows them to be seen.

Can Path Workbench perform 3D surface milling?

Yes, Path provides for 3D surface milling Operations. It requires installation in the Macro file path of OpenCamLibrary--a 3rd party Open Source module.

OpenCamLibrary is not integrated into FreeCAD to ensure no licensing violations occur.

What do I do if the default Operation strategies don't meet my needs?

For Pocket Operations, the Start Point defaults to XYZ = 000, and is always on, but it too can be configured in the Property view window. Pocket and Facing Operations provide explicit Climb versus Conventional Cut Mode specification in the Operation tab.

For Contour style Operations, the Operation tab has a "Direction" input that may be configured as CW, or CCW, which defines the cut direction. For reference:

  1. Cut Side = Outside, Cut Direction = CCW, Climb Cut
  2. Cut Side = Outside, Cut Direction = CW, Conventional Cut
  3. Cut Side = Inside, Cut Direction = CW, Conventional Cut

Cut Side = Inside, Cut Direction = CCW, Climb Cut

Start Points can be enabled--and configured in the Property view window.

In FaceMill Operations Material Allowance can be specified, allowing overcutting for positive values, and undercutting for negative values.

In Contour and Pocket Operations, the Extra Offset serves the same purpose.

These inputs are valuable, allowing functionality including:

  1. Defining Roughing Passes, in conjunction with the Depths input fields.
  2. Specifying overcut for Facing operations
  3. Features smaller than the Tool diameter, that must be faced, can benefit from specifying an Outside Contour cut with a negative Extra Offset value.

Judicious care should be exercised when specifying Material Allowances and Offsets, at the risk of undesired cuts into the Stock.

What do I do if an Operation generates more Vertical movements than my Job can tolerate?

Operations such as 3D_Pocket, Pocket_Shape, and FaceMill, but not Contour Operations have a configuration option to keep the tool down, in the Data tab of the Property View.

How can I leave tabs to clamp my milled work?

Path workbench provides a Tag dressup for just this purpose.

What is a Postprocessor?

The Postprocessor is used to tailor output code to target CNC controllers for various machines, in their G-Code dialect.

Can I modify an existing, or make my own Postprocessor?

Postprocessors are Python scripts, and are saved in the Macro file path. They are intended to be modified, or used as a template for further Postprocessor development.

I only want to use one Postprocessor--can I make it the default, or hide other options?


How I can set metric/imperial units for my path object?

The 3D model units are defined in the Edit->Preferences...>General->Units tab's User System drop menu.

The Units setting configuring how the the target mill interprets the Job G-Code is set in the output Postprocessor, which inserts a G20, or a G21 G-Code command to indicate inches or millimeters, respectively.

The Postprocessor also is configured for Units/Second, or Units/Minute. If set for Units/Minute, the Path workbench internal G-Code dialect Feed rate is multiplied by 60.

Mismatches between the 3D model and Postprocessor settings are likely culprits for factor of 60 errors in Feed rate, and factors of 25.4 in distance.

How I can simulate my milling strategies?

A volumetric simulator is provided to view the result of cutting the tool geometries included in the Job Operations against the Stock.

If the path lines obscure the simulation result, their visibility should be toggled off before simulation.

What is the significance of the path line colors?

Path line colors are defined in the Edit->Preference...->Path->Path colors tab. Default colors include:

  1. Green for normal paths.
  2. Red for rapid paths.
  3. Yellow for Probed paths.

How do I Enable/Disable visibility of path lines?

Path workbench allows control of the display of path lines by toggling the visibility of the Job by selecting it in the Combo View. The visibility of individual or groups of Operations are then toggled from the Combo View.

How do I check that my G-Code sequence is correct?

By default, the Postprocessor output is displayed in a window before saving. This--along with the Path CAM simulator provide a means to examine the Job before processing it on a CNC machine. The G-Code inspection tool allows you to inspect the internal Path G-Code for each Operation, providing a means to trace whether the output of the Postprocessor reflects what is defined in the Operation.

The Operations list in the Combo View panel displays the sequence that the operations will be processed in the Job. If the Operations are correct, but not in the desired sequence, that can be adjusted by double clicking the Operations list and dragging the Operations to their proper location, or by double clicking the Job editor and selecting the Workflow tab, then using the Up/Down arrows on selected Operations to sort them.

Why am I not getting correct G-Code output from my Postprocessor for Operations inserted using the Partial Command->Custom command?

Commonly, the Custom G-Code command because the format is always in Units/second, it can cause factor of 60 errors for CNC machine targets that operate in Units/minute.

Why do changes to Placement values in the Property View not seem to work correctly in Path workbench?

"The Path feature also holds a Placement property. Changing the value of that placement will change the position of the Feature in the 3D view, although the Path information itself won't be modified. The transformation is purely visual. This allows you, for example, to create a Path around a face that has a particular orientation on your model, that is not the same orientation as your cutting material will have on the CNC machine.

However, Path Compounds can make use of the Placement of their children (see below)."

[Path scripting ]

Why does Path workbench on my computer seem to miss functionality that I see in other users forum posts?

By default, Experimental functionality is hidden in Path workbench.

Why do Youtube videos posted by Path workbench developers appear out of synch with the Path workbench?

Path workbench shifted dramatically from FreeCAD v0.16 to v0.17, and any videos posted prior to January 1st, 2018, are very likely to contain information that is no longer in synch with v0.17 of FreeCAD Path workbench.

Why are arcs not round, but are made of a set of straight lines?

This is only a matter of displaying the path. You can change this in the preferences: Load Path workbench.

  1. open Preferences->Path->Job Preferences
  2. set the values for Default Geometry Tolerance and Default Curve Accuracy to small values but not to 0, e.g. to 0.01mm.
  3. confirm the change
  4. Restart FreeCAD.